https://www.phoenixcontact.com/pi/products/1500774
Connector - SACC-M12MS-5CON-PG 9 - 1500774
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Connector, Universal, 5-position, Plug straight M12, Coding: A, Screw connection, knurl material: Plastic,
cable gland Pg9, external cable diameter 6 mm ... 8 mm
Your advantages
Safe use in the field, thanks to a high degree of protection
Flexible: connectors for on-site assembly
Screw connection: proven connection technology for a large selection of different conductors
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4017918610517
Sales Key
02
Technical data
Dimensions
Diameter housing
20 mm
Length
60 mm
External cable diameter
6 mm ... 8 mm
Stripping length of the sheath
20 mm
Stripping length of the individual wire
5 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Degree of protection
IP67
General
Note
NOTE: Observe the permissible bending radii when laying conductors,
since the degree of protection may be put in jeopardy if the bending
09/11/2020 Page 1 / 10
https://www.phoenixcontact.com/pi/products/1500774
Connector - SACC-M12MS-5CON-PG 9 - 1500774
Technical data
General
forces are too high. Alleviate mechanical loads upstream of the
connector, e.g. by using cable ties.
Rated current at 40°C
4A
Rated voltage
48 V AC
60 V DC
Number of positions
5
Insulation resistance
≥ 100 MΩ
Coding
A - standard
Standards/regulations
M12 connector IEC 61076-2-101
Signal type/category
Universal
Status display
No
Overvoltage category
II
Degree of pollution
3
Connection method
Screw connection
Conductor cross section
0.25 mm² ... 0.75 mm² (without ferrule)
0.14 mm² ... 0.75 mm² (with ferrule)
0.25 mm² ... 0.75 mm² (solid)
Conductor cross section AWG
24 ... 18 (without ferrule)
26 ... 20 (with ferrule)
Insertion/withdrawal cycles
≥ 50
Torque
0.4 Nm (M12 knurl)
0.2 Nm (Screw terminal blocks)
0.8 Nm ... 1 Nm (Pressure screw with sleeve housing)
Tightening torque
Screw plug insert with sleeve housing as far it will go
Assembly instructions
The wires can be connected both with ferrules and without ferrules
Material
Flammability rating according to UL 94
HB
Contact material
CuZn
Contact surface material
CuSnZn
Contact carrier material
PA
Material of grip body
PA
Material, knurls
Plastic
Sealing material
NBR
Standards and Regulations
Standards/specifications
M12 connector IEC 61076-2-101
Connection in acc. with standard
CUL
Flammability rating according to UL 94
HB
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
09/11/2020 Page 2 / 10
https://www.phoenixcontact.com/pi/products/1500774
Connector - SACC-M12MS-5CON-PG 9 - 1500774
Technical data
Environmental Product Compliance
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Schematic diagram
Male/Female M12
09/11/2020 Page 3 / 10
https://www.phoenixcontact.com/pi/products/1500774
Connector - SACC-M12MS-5CON-PG 9 - 1500774
Dimensional drawing
Plug, M12 x 1, straight
09/11/2020 Page 4 / 10
https://www.phoenixcontact.com/pi/products/1500774
Connector - SACC-M12MS-5CON-PG 9 - 1500774
Schematic diagram
Cable connection side M12 (screw connection)
09/11/2020 Page 5 / 10
https://www.phoenixcontact.com/pi/products/1500774
Connector - SACC-M12MS-5CON-PG 9 - 1500774
Schematic diagram
Pin assignment M12 male connector, 5-pos., A-coded, male side
Classifications
eCl@ss
eCl@ss 10.0.1
27440102
eCl@ss 4.0
27260700
eCl@ss 4.1
27260700
eCl@ss 5.0
27260700
eCl@ss 5.1
27260700
eCl@ss 6.0
27279200
eCl@ss 7.0
27440104
eCl@ss 8.0
27440104
eCl@ss 9.0
27440102
09/11/2020 Page 6 / 10
https://www.phoenixcontact.com/pi/products/1500774
Connector - SACC-M12MS-5CON-PG 9 - 1500774
Classifications
ETIM
ETIM 2.0
EC001121
ETIM 3.0
EC002062
ETIM 4.0
EC002062
ETIM 5.0
EC002062
ETIM 6.0
EC002062
UNSPSC
UNSPSC 6.01
31251501
UNSPSC 7.0901
31251501
UNSPSC 11
31251501
UNSPSC 12.01
31251501
UNSPSC 13.2
39121413
UNSPSC 18.0
39121413
UNSPSC 19.0
39121413
UNSPSC 20.0
39121413
UNSPSC 21.0
39121413
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / cULus Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Nominal voltage UN
125 V
Nominal current IN
4A
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Nominal voltage UN
125 V
FILE E 221474
FILE E 221474
09/11/2020 Page 7 / 10
https://www.phoenixcontact.com/pi/products/1500774
Connector - SACC-M12MS-5CON-PG 9 - 1500774
Approvals
Nominal current IN
4A
cULus Recognized
Accessories
Accessories
Cable by the meter
Cable reel - SAC-5P-100,0-186/0,75 - 1535590
By the meter, Cable reel, PUR, black-gray RAL 7021, 5-wire, color single wire: Brown, white, blue, black, gray, cable
length: 100 m
Cable end sleeve
Ferrule - A 0,25- 5 - 3202465
Ferrule, length: 5 mm, color: silver
Crimping tool
Crimping pliers - CRIMPFOX 6H - 1212046
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry
Protective cap
09/11/2020 Page 8 / 10
https://www.phoenixcontact.com/pi/products/1500774
Connector - SACC-M12MS-5CON-PG 9 - 1500774
Accessories
Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873
M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 plugs
Screwdriver tools
Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600
Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits
Tool - SACC BIT M12-D20 - 1208445
Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Stripping tool
Stripping tool - WIREFOX SAC - 1212623
Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to
7 mm, any stripping length
Torque tool
09/11/2020 Page 9 / 10
https://www.phoenixcontact.com/pi/products/1500774
Connector - SACC-M12MS-5CON-PG 9 - 1500774
Accessories
Torque screwdriver - TSD 04 SAC - 1208429
Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors
Torque screwdriver - TSD-M 1,2NM - 1212224
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Tel. +49 5235 300
Fax +49 5235 3 41200
http://www.phoenixcontact.com
09/11/2020 Page 10 / 10
