1511860

https://www.phoenixcontact.com/us/products/1511860 Connector - SACC-M12FS-8CON-PG 9-SH - 1511860 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 8-position, shielded, Socket straight M12, A-coded, Screw connection, Knurl material: Zinc die-cast, nickel-plated, Cable gland Pg9, External cable diameter 6 mm ... 8 mm Product Features ■ ■ ■ ■ Safe use in the field, thanks to a high degree of protection Flexible: connectors for on-site assembly Screw connection: proven connection technology for a large selection of different conductors Reliable signal transmission - 360° shielding in environments with electromagnetic interference Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 49.4 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions External cable diameter 6 mm ... 8 mm Stripping length of the sheath 35 mm Stripping length of the individual wire 5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 2A Rated voltage 30 V Number of positions 8 05/05/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1511860 Connector - SACC-M12FS-8CON-PG 9-SH - 1511860 Technical data General Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section 0.25 mm² ... 0.5 mm² Conductor cross section AWG 24 ... 20 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 0.8 Nm ... 1 Nm (Pressure nut with coupling sleeve) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Connection in acc. with standard CUL Flammability rating according to UL 94 HB Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 05/05/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1511860 Connector - SACC-M12FS-8CON-PG 9-SH - 1511860 Classifications eCl@ss eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC001121 ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized      Nominal current IN 2A 05/05/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1511860 Connector - SACC-M12FS-8CON-PG 9-SH - 1511860 Approvals     Nominal voltage UN 30 V cUL Recognized      Nominal current IN 2A Nominal voltage UN 30 V EAC  EAC  cULus Recognized  Drawings Schematic diagram Dimensional drawing Pin assignment M12 socket, 8-pos., A-coded, view female side Ø20 M12 ca. 56 18 M12 x 1 socket, straight, shielded 05/05/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1511860 Connector - SACC-M12FS-8CON-PG 9-SH - 1511860 Functional drawing Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/05/2016   Page 5 / 5