1521261

Extract from the online catalog     SACC-M12MSD-4CON-PG 9-SH Order No.: 1521261 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1521261   Bus system plug connector, male, straight, 4-pos., M12, shielded, Dcoded, screw connection, metal knurl, cable screw connection Pg9   Product notes WEEE/RoHS-compliant since: 03/21/2006 Commercial data GTIN (EAN) 4 017918 968618 sales group D124 Pack 1 pcs. Customs tariff 85366990 Catalog page information Page 51 (PC-2009) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data General data Rated current at 40°C 4A Rated voltage 60 V Number of positions 4 Volume resistance ≤ 3 mΩ PHOENIX CONTACT Inc., USA http://www.phoenixcon.com Page 1 / 4 Jan 6, 2011 SACC-M12MSD-4CON-PG 9-SH Order No.: 1521261 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1521261 Insulation resistance ≥ 100 MΩ Ambient temperature (operation) -40 °C ... 85 °C (Male connector / female connector) General characteristics Standards/regulations M12 connector IEC 61076-2-101 Coding D - data Surge voltage category II Pollution degree 3 Degree of protection IP67 Insertion/withdrawal cycles ≥ 100 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material of grip body Zinc die-cast, nickel-plated Material, knurls Nickel-plated brass Sealing material NBR Type of connection Screw connection Conductor cross section stranded min. 0.25 mm² Conductor cross section stranded max. 0.75 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 18 External cable diameter 6 mm ... 8 mm Status display No Conductor data Transmission characteristics (category) CAT5 (IEC 11801:2002), CAT5e (TIA 568B:2001) Diagrams/Drawings Functional drawing Assembly steps for M12 male/female connector and conductor a = Slide on parts b= Strip conductor, widen shield and lay around the shielding ring, cut off projecting mesh. Slide cores through the housing. Mount shielding ring, gasket and clamping cage. Tighten pressure screw to fix the cable. Screw down cores. Mount male/female part. Tighten pressure screw. PHOENIX CONTACT Inc., USA http://www.phoenixcon.com Page 2 / 4 Jan 6, 2011 SACC-M12MSD-4CON-PG 9-SH Order No.: 1521261 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1521261 Dimensioned drawing M12 x 1 male connector, straight, shielded Schematic diagram Pin assignment M12 male connector, 4-pos., D-coded, male side PHOENIX CONTACT Inc., USA http://www.phoenixcon.com Page 3 / 4 Jan 6, 2011 SACC-M12MSD-4CON-PG 9-SH Order No.: 1521261 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1521261 Address PHOENIX CONTACT Inc., USA 586 Fulling Mill Road Middletown, PA 17057,USA Phone (800) 888-7388 Fax (717) 944-1625 http://www.phoenixcon.com © 2010 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Inc., USA http://www.phoenixcon.com Page 4 / 4 Jan 6, 2011