1521410

https://www.phoenixcontact.com/us/produkte/1521410 Flush-type connector - SACC-E-MINMS-3CON-PG13/0.5 - 1521410 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type connector, 3-pos., 7/8", front mounting with Pg13.5 thread, with 0.5 m PVC litz wire, 3 x 0.75 mm²   Key commercial data Packing unit 1 Minimum order quantity 1 Catalog page Page 37 (PC-2011) GTIN Custom tariff number 85366990 Country of origin GERMANY Technical data General data Rated current at 40°C 12 A Rated voltage 250 V Number of positions 3 Volume resistance ≤ 5 mΩ Insulation resistance ≥ 100 MΩ Length of cable 0.5 m Ambient temperature (operation) -40 °C ... 85 °C (connector) General characteristics Coding A - standard Surge voltage category II Pollution degree 3 Degree of protection IP67 Contact material CuZn Contact surface material Au Contact carrier material PUR Material, knurls Zinc die-cast, nickel-plated Sealing material Viton 08.10.2012   Page 1 / 6 https://www.phoenixcontact.com/us/produkte/1521410 Flush-type connector - SACC-E-MINMS-3CON-PG13/0.5 - 1521410 Technical data General characteristics Mounting type Front mounting Pg13.5 Connection method Individual wires Status display No Conductor data Cable type PVC litz wire Conductor cross section 0.75 mm² AWG signal line 18 Conductor structure signal line 24x 0.20 mm Core diameter including insulation 2.7 mm Thickness, insulation 0.85 mm (Core insulation) Wire colors green/yellow, brown, blue Material conductor insulation PE Classifications eclass eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 etim ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 unspsc UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / cUL Recognized / GOST / cULus Recognized 08.10.2012   Page 2 / 6 https://www.phoenixcontact.com/us/produkte/1521410 Flush-type connector - SACC-E-MINMS-3CON-PG13/0.5 - 1521410 Approvals Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 20 Nominal current IN 10 A Nominal voltage UN 600 V cUL Recognized      mm²/AWG/kcmil 20 Nominal current IN 10 A Nominal voltage UN 600 V GOST  cULus Recognized  Drawings Dimensioned drawing Dimensioned drawing +0,1 Ø20,5 PG 13,5 Ø22 ±0,1 45 ° 0,75x45° 18,8 Mounting panel with thread +0,1 Mounting panel with feed-through hole 08.10.2012   Page 3 / 6 https://www.phoenixcontact.com/us/produkte/1521410 Flush-type connector - SACC-E-MINMS-3CON-PG13/0.5 - 1521410 Schematic diagram 1 2 3 Pin assignment, plug, 7/8"-16UNF, 3-pos., view of male side 08.10.2012   Page 4 / 6 https://www.phoenixcontact.com/us/produkte/1521410 Flush-type connector - SACC-E-MINMS-3CON-PG13/0.5 - 1521410 Dimensioned drawing 26,5 9,5 500 Ø27 Ø20,4 7,5 24 7/8" flush-type connector 08.10.2012   Page 5 / 6 https://www.phoenixcontact.com/us/produkte/1521410 © Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 08.10.2012   Page 6 / 6