1527618

https://www.phoenixcontact.com/us/products/1527618 Y distributor - SAC-3P-M12Y/2XM12FS B PE S21BK - 1527618 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Y distributor, 4-position, Plug straight M12, A-coded, on Socket straight M12, A-coded, PIN 2+4 bridged and Socket straight M12, A-coded, PIN 2+4 bridged Key Commercial Data Packing unit 1 STK Minimum order quantity 5 STK Custom tariff number 85366990 Country of origin Poland Technical data Dimensions Center distance 21 mm Ambient conditions Degree of protection IP65 IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 4 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II 08/16/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/1527618 Y distributor - SAC-3P-M12Y/2XM12FS B PE S21BK - 1527618 Technical data General Degree of pollution 3 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 connector) Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material Ni/Au Contact carrier material TPU GF Material of grip body TPU, hardly inflammable, self-extinguishing Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Standards/specifications M12 connector IEC 61076-2-101 Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 HB Drawings Schematic diagram 4 3 Schematic diagram 3 4 5 5 1 2 Pin assignment M12 male connector, 5-pos., A-coded, male side 2 1 Pin assignment socket M 12, 3-pos. + PE 08/16/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/1527618 Y distributor - SAC-3P-M12Y/2XM12FS B PE S21BK - 1527618 Schematic diagram 3 Dimensional drawing 4 50,1 17,3 2 5 1 Ø 4,2 M12 Connector pin assignment M12 socket, 3-pos., bridged, with PE, A-coded, female side view 35,6 1 Ø14,8 2 Plug M12 x 1, Y distributor, inner gauge of 21 mm Circuit diagram S1 1 1 2 2 3 3 4 4 5 5 1 2 3 4 S2 5 Contact assignment of the M12 Y distributor Classifications eCl@ss eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27061801 eCl@ss 6.0 27061801 eCl@ss 7.0 27061801 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC000830 ETIM 3.0 EC001855 ETIM 4.0 EC001855 ETIM 5.0 EC002062 08/16/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/1527618 Y distributor - SAC-3P-M12Y/2XM12FS B PE S21BK - 1527618 Classifications UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Listed / cUL Listed / UL Listed / cULus Listed Ex Approvals Approvals submitted Approval details UL Listed      Nominal current IN 4A Nominal voltage UN 300 V cUL Listed      Nominal current IN 4A Nominal voltage UN 300 V 08/16/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/1527618 Y distributor - SAC-3P-M12Y/2XM12FS B PE S21BK - 1527618 Approvals UL Listed      Nominal current IN 4A Nominal voltage UN 30 V cULus Listed  Accessories Accessories Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Screw plug - PROT-M12 MS-PA-CHAIN - 1430899 M12 sealing cap with fixing band, for sensor cables, for free M12 sockets     08/16/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/1527618 Y distributor - SAC-3P-M12Y/2XM12FS B PE S21BK - 1527618 Accessories Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 sockets     Screwdriver tools Tool - SAC BIT M12-D15 - 1208432 Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, with a knurl diameter of 15 mm, for 4 mm hexagonal drive     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/16/2016   Page 6 / 6