1534384

https://www.phoenixcontact.com/gb/products/1534384 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/0,5-910 - 1534384 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bus system flush-type socket, PROFIBUS, 2-pos., M12, shielded, B-coded, rear/screw mounting with M16 thread, with 0.5 m bus cable, 2 x 0.25 mm² Why buy this product ■ ■ ■ ■ ■ Pre-assembled with cables in various standard lengths for immediate use Customer-specific assemblies and cable lengths can be supplied Sealed on the cable side for optimum tightness of seal Cable designs for all common networks and fieldbuses For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 STK GTIN Weight per Piece (excluding packing) 55.9 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if 08/06/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1534384 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/0,5-910 - 1534384 Technical data General there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 2 Insulation resistance ≥ 100 MΩ Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Test voltage 2500 V Insertion/withdrawal cycles > 100 Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material, knurls Nickel-plated brass Sealing material FKM Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Cable Cable type PROFIBUS Cable type (abbreviation) 910 UL AWM style 21198 (80°C/300 V) Signal type/category PROFIBUS Cable structure 1x2xAWG24/19 Conductor cross section 2x 0.25 mm² (Signal line) AWG signal line 24 Conductor structure signal line 19x 0.13 mm Core diameter including insulation 2.55 mm ±0.07 mm Wire colors Red, green Overall twist 2 cores with 2 fillers to the core Shielding Plastic-coated aluminum foil, tinned copper braided shield 08/06/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1534384 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/0,5-910 - 1534384 Technical data Cable Optical shield covering 85 % External sheath, color violet RAL 4001 External cable diameter D 7.8 mm ±0.2 mm Smallest bending radius, fixed installation 40 mm Smallest bending radius, movable installation 65 mm Number of bending cycles 4000000 Bending radius 65 mm Traversing path 4.5 m Traversing rate 3 m/s Acceleration 3 m/s² Outer sheath, material PUR Material, filler PP Material conductor insulation Foam-Skin PP Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 5 GΩ*km Conductor resistance ≤ 78.6 Ω/km Cable capacity nom. 30 pF/m Wave impedance 150 Ω ±10 % (3 MHz ... 20 MHz) Wave attenuation ≤ 0.049 dB/m (at 16 MHz) Nominal voltage, cable 30 V Test voltage Core/Core 1500 V (50 Hz, 1 min.) Test voltage Core/Shield 1500 V (50 Hz, 1 min.) Flame resistance UL 1581, Sec. 1060 (FT-1) IEC 60332-1-2 Halogen-free in accordance with DIN VDE 0472 part 815 According to IEC 60754-1 Other resistance Low adhesion Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation) -30 °C ... 80 °C (cable, flexible installation) ≤ 70 °C (cable, drag chain applications) Ambient temperature (storage/transport) -40 °C ... 80 °C Drawings 08/06/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1534384 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/0,5-910 - 1534384 Dimensional drawing Schematic diagram !4,5 3 4 Ø15,9⁺⁰¹ 5 2 1 Pin assignment M12 socket, 5-pos., B-coded, female side 13,5⁺⁰¹ Housing cutout for M16 fastening thread, mounting panel with feedthrough hole (alternatively with surface as protection against rotation) Cable cross section Dimensional drawing 38,1 30,5 19 M12 1,5 M16x1,5 20,5 2,8 17 PROFIBUS [910] M12 flush-type connector Circuit diagram 1 2 GN 4 RD 3 5 Contact assignment of the M12 socket Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 08/06/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1534384 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/0,5-910 - 1534384 Classifications ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC000830 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals EAC / EAC Ex Approvals Approvals submitted Approval details EAC  EAC  Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/06/2016   Page 5 / 5