1534410

https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bus system flush-type socket, PROFIBUS, 2-pos., M12, shielded, B-coded, rear/screw mounting with M16 thread, with 5 m bus cable, 2 x 0.25 mm² Your advantages  Pre-assembled with cables in various standard lengths for immediate use  Customer-specific assemblies and cable lengths can be supplied  Sealed on the cable side for optimum tightness of seal  Cable designs for all common networks and fieldbuses  For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356026581 Weight per Piece (excluding packing) 367.000 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 5m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) 11/08/2019   Page 1 / 11 https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Technical data Ambient conditions Degree of protection IP67 (When plugged in) IP65 (When plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 2 Insulation resistance ≥ 100 MΩ Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Test voltage 2500 V Insertion/withdrawal cycles > 100 Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material, knurls Nickel-plated brass Sealing material FKM Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 CE safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. 11/08/2019   Page 2 / 11 https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Technical data Standards and Regulations • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. • The products are suitable for applications in plant, controller, and electrical device engineering. • When operating the connectors in outdoor applications, they must be separately protected against environmental influences. • Assembled products may not be manipulated or improperly opened. • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). • When using the product in direct connection with third-party manufacturers, the user is responsible. • For operating voltages > 50 V AC, conductive connector housings must be grounded • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product • Only use tools recommended by Phoenix Contact • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products • Ensure that the protective or functional ground has been properly connected. • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Cable Cable type PROFIBUS Cable type (abbreviation) 910 UL AWM style 21198 (80°C/300 V) Signal type/category PROFIBUS Cable structure 1x2xAWG24/19 11/08/2019   Page 3 / 11 https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Technical data Cable Conductor cross section 2x 0.25 mm² (Signal line) AWG signal line 24 Conductor structure signal line 19x 0.13 mm Core diameter including insulation 2.55 mm ±0.07 mm Wire colors Red, green Overall twist 2 cores with 2 fillers to the core Shielding Plastic-coated aluminum foil, tinned copper braided shield Optical shield covering 85 % External sheath, color violet RAL 4001 External cable diameter D 7.8 mm ±0.2 mm Smallest bending radius, fixed installation 40 mm Smallest bending radius, movable installation 65 mm Number of bending cycles 4000000 Bending radius 65 mm Traversing path 4.5 m Traversing rate 3 m/s Acceleration 3 m/s² Cable weight 90 kg/km Outer sheath, material PUR Material, filler PP Material conductor insulation Foam-Skin PP Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 5 GΩ*km Conductor resistance ≤ 78.6 Ω/km Cable capacity nom. 30 pF/m Wave impedance 150 Ω ±10 % (3 MHz ... 20 MHz) Attenuation ≤ 0.049 dB/m (at 16 MHz) Nominal voltage, cable 30 V Test voltage Core/Core 1500 V (50 Hz, 1 min.) Test voltage Core/Shield 1500 V (50 Hz, 1 min.) Flame resistance UL 1581, Sec. 1060 (FT-1) IEC 60332-1-2 Halogen-free in accordance with DIN VDE 0472 part 815 according to IEC 60754-1 Other resistance Low adhesion Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation) 11/08/2019   Page 4 / 11 https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Technical data Cable -30 °C ... 80 °C (cable, flexible installation) ≤ 70 °C (cable, drag chain applications) Ambient temperature (storage/transport) -40 °C ... 80 °C Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 11/08/2019   Page 5 / 11 https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Dimensional drawing Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) 11/08/2019   Page 6 / 11 https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Dimensional drawing M12 flush-type connector 11/08/2019   Page 7 / 11 https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Circuit diagram Contact assignment of the M12 socket 11/08/2019   Page 8 / 11 https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Schematic diagram Pin assignment M12 socket, 5-pos., B-coded, female side 11/08/2019   Page 9 / 11 https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Cable cross section PROFIBUS [910] Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 11/08/2019   Page 10 / 11 https://www.phoenixcontact.com/us/products/1534410 Bus system flat-type plug - SACCBP-M12FSB-2CONM16/5,0-910 - 1534410 Classifications eCl@ss eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC000830 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC   Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com    B.00767 11/08/2019   Page 11 / 11