1534452

https://www.phoenixcontact.com/us/products/1534452 Bus system flat-type plug - SACCBP-M12MS-5CONM16/5,0-920 - 1534452 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Bus system flush-type plug, DeviceNet/CANopen, 5-pos., M12, shielded, A-coded, rear/screw mounting with M16 thread, with 5 m bus cable, 2 x 0.2 mm², 2 x 0.32 mm²         Key commercial data Packing unit 11 Weight per Piece (excluding packing) 310.0 GRM Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 5m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 5 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category II 29.10.2013   Page 1 / 5 https://www.phoenixcontact.com/us/products/1534452 Bus system flat-type plug - SACCBP-M12MS-5CONM16/5,0-920 - 1534452 Technical data General Pollution degree 3 Test voltage 2500 V Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material, knurls Nickel-plated brass Sealing material NBR Cable Cable type CAN Bus/DeviceNet Cable type (abbreviation) 920 Conductor cross section 2x 0.25 mm² (signal line) 2x 0.34 mm² (Power supply) 1x 0.34 mm² (Drain wire) AWG signal line 24 AWG power supply 22 Conductor structure signal line 19x 0.13 mm Conductor structure, voltage supply 19x 0.15 mm Core diameter including insulation 1.95 mm ±0.05 mm (signal line) 1.4 mm ±0.05 mm (Power supply) Wire colors Red-black, blue-white Twisted pairs 2 cores to the pair Type of pair shielding Aluminum-lined polyester foil Overall twist 2 pairs around a drain wire in the center to the core Shielding Tinned copper braided shield Optical shield covering 80 % External sheath, color Violet, RAL 4001 External cable diameter D 6.7 mm ±0.3 mm Smallest bending radius, fixed installation 67 mm Smallest bending radius, movable installation 67 mm Number of bending cycles 2000000 Bending radius 67 mm Traversing path 4.5 m Traversing rate 3 m/s 29.10.2013   Page 2 / 5 https://www.phoenixcontact.com/us/products/1534452 Bus system flat-type plug - SACCBP-M12MS-5CONM16/5,0-920 - 1534452 Technical data Cable Acceleration 3 m/s² Outer sheath, material PUR Material conductor insulation Foamed PE (signal line) PE (Power supply) Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 5 GΩ*km (signal line) ≥ 5 GΩ*km (Power supply) Working capacitance nom. 40 nF (signal line) Wave impedance 120 Ω ± 12 Ω (with 1 MHz) Nominal voltage, cable max. 300 V Test voltage, cable 2000 V (50 Hz, 1 min.) Flame resistance UL 1581, Sec. 1060 (FT-1) IEC 60332-1 Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation) -20 °C ... 70 °C (cable, flexible installation) Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 29.10.2013   Page 3 / 5 https://www.phoenixcontact.com/us/products/1534452 Bus system flat-type plug - SACCBP-M12MS-5CONM16/5,0-920 - 1534452 Classifications UNSPSC UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals GOST / GOST Ex Approvals Approvals submitted Approval details GOST  GOST  Drawings 29.10.2013   Page 4 / 5 https://www.phoenixcontact.com/us/products/1534452 Bus system flat-type plug - SACCBP-M12MS-5CONM16/5,0-920 - 1534452 Dimensioned drawing Schematic diagram max.4,5 4 3 Ø16,1 5 1 2 Pin assignment M12 male connector, 5-pos., A-coded, male side 13,5 +0,1 Housing cutout for M16 fastening thread, mounting panel with feedthrough hole (alternatively with surface as protection against rotation) Cable cross section Dimensioned drawing 46,5 21 M12x1 SW19 M16x1,5 11 CAN Bus/DeviceNet [920] M12 flush-type plug Circuit diagram 1 SH 2 RD 3 BK 4 WH 5 BU Contact assignment of the M12 plug © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 29.10.2013   Page 5 / 5