1535215

https://www.phoenixcontact.com/us/products/1535215 Bus system flat-type plug - SACC-EC-FSD-4CON-M16/0,5 SCO - 1535215 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bus system flush-type socket, PROFINET, 4-pos., M12-SPEEDCON, D-coded, front/screw mounting with M16 thread, can be positioned, with 0.5 m TPE litz wire, 4 x 0.34 mm² Why buy this product  Pre-assembled with litz wires for immediate use  Customer-specific assemblies and litz wire lengths available  Sealed on the litz wire side for optimum leak-tightness  All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design  For high transmission safety: shield connection to the housing with optional EMC nut  SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 24.700 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using 10/30/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1535215 Bus system flat-type plug - SACC-EC-FSD-4CON-M16/0,5 SCO - 1535215 Technical data General a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 250 V Rated surge voltage 2.5 kV Number of positions 4 Insulation resistance ≥ 100 MΩ Coding D - data Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Front mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 10/30/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1535215 Bus system flat-type plug - SACC-EC-FSD-4CON-M16/0,5 SCO - 1535215 Schematic diagram Ø17 +0,2 M16x1,5 45 ° Dimensional drawing Housing cutout for M16 fastening thread, mounting panel with thread Pin assignment M12 socket, 4-pos., D-coded, female side Dimensional drawing 24,5 11,5 Circuit diagram 500 min.2,5 M16x1,5 2 M12 flush-type socket, can be positioned 1 YE 3 OG 2 WH 4 BU Contact assignment of the M12 socket Approvals Approvals Approvals cULus Recognized / UL Recognized / EAC Ex Approvals Approval details cULus Recognized  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E221474-20140616     mm²/AWG/kcmil 20 Nominal current IN 4A Nominal voltage UN 250 V 10/30/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1535215 Bus system flat-type plug - SACC-EC-FSD-4CON-M16/0,5 SCO - 1535215 Approvals UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 118976     mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 250 V EAC   B.00767 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 10/30/2016   Page 4 / 4