1542606

https://www.phoenixcontact.com/pi/products/1542635 Panel feed-through - SACC-DSIV-FSB-5CON-L180 SCOTHR - 1542635 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 5-pos., M12 SPEEDCON, B-coded, rear/screw mounting with M12 thread, with polarity protection, with straight THR solder connection Key Commercial Data Packing unit 60 STK GTIN Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 5 Insulation resistance ≥ 100 MΩ Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method THR solder connection Mounting type Rear mounting M12 x 1 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au 03/10/2016   Page 1 / 4 https://www.phoenixcontact.com/pi/products/1542635 Panel feed-through - SACC-DSIV-FSB-5CON-L180 SCOTHR - 1542635 Technical data Material Contact carrier material PPA Material, knurls Zinc die-cast, nickel-plated Sealing material FKM / EPDM Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals EAC Ex Approvals 03/10/2016   Page 2 / 4 https://www.phoenixcontact.com/pi/products/1542635 Panel feed-through - SACC-DSIV-FSB-5CON-L180 SCOTHR - 1542635 Approvals Approvals submitted Approval details EAC  Drawings Schematic diagram 3 Dimensional drawing 4 Ø14,8 -0,1 3 Ø12,2 ±0,05 1,2 ±0,04 5 2 1 Pin assignment M12 socket, 5-pos., B-coded, female side Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 1 Dimensional drawing Drilling diagram Ø5 Ø1,2 4,5 1,2 ±0,04 Ø12,2 ±0,05 Ø1,4 8,5 7,05 5 45 ° 3 Ø1 Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 2 Dimensional drawing Dimensional drawing ≤2 ≤3 21 2 Ø14 Ø16,5 Ø1 Ø12,1+0,1 15 7 3 2 14 max.3 M12 flush-type connector 1 10,6 -0,1 Housing cutout for M12 fastening thread, mounting panel with feedthrough hole (alternative with surface as protection against rotation) 03/10/2016   Page 3 / 4 https://www.phoenixcontact.com/pi/products/1542635 Panel feed-through - SACC-DSIV-FSB-5CON-L180 SCOTHR - 1542635 Dimensional drawing 230 20 28 6 155 22 5,2 THR tray packaging Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 03/10/2016   Page 4 / 4