1542619

https://www.phoenixcontact.com/us/products/1542619 Bus system flat-type plug - SACC-DSIV-FSD-4CON-L180 SCO - 1542619 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bus system flush-type socket, Ethernet, 4-pos., M12 SPEEDCON, D-coded, rear/screw mounting with M12 thread, with polarity protection, with straight solder connection Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc Weight per Piece (excluding packing) 10.4 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) Rated current at 40°C 4A Rated voltage 250 V Number of positions 4 Insulation resistance ≥ 100 MΩ Coding D - data Standards/regulations IEC 61076-2-101 Status display No Overvoltage category II 04/04/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1542619 Bus system flat-type plug - SACC-DSIV-FSD-4CON-L180 SCO - 1542619 Technical data General Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Mounting type Rear mounting M12 x 1 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM / EPDM Standards and Regulations Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC000830 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 04/04/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1542619 Bus system flat-type plug - SACC-DSIV-FSD-4CON-L180 SCO - 1542619 Approvals Approvals Approvals UL Recognized / EAC / EAC Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 250 V EAC  EAC  Drawings Schematic diagram Pin assignment M12 socket, 4-pos., D-coded, female side Dimensional drawing Ø14,8 -0,1 3 Ø12,2 ±0,05 1,2 ±0,04 Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 1 04/04/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1542619 Bus system flat-type plug - SACC-DSIV-FSD-4CON-L180 SCO - 1542619 Drilling diagram Ø5 Ø1,3 4 5° 3 6,5 Ø2,8 Ø12,2 ±0,05 1,2 ±0,04 Ø2,1 15 7,05 Dimensional drawing Ø1 Housing cut-out for two-part M12 flush-type connectors with THR and wave M12 flush-type connector soldering connection, version 2 Dimensional drawing 27,5 2 3 3,5 SW15 19,5 7 Ø14 Ø16,5 2 max.3 SW14 M12 flush-type connector Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/04/2016   Page 4 / 4