1542716

https://www.phoenixcontact.com/gb/products/1542716 Panel feed-through - SACC-DSI-MS-8CON-PG 9/0,5 SCO - 1542716 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 8-pos., M12-SPEEDCON, rear/screw mounting with Pg9 thread, with 0.5 m TPE litz wire, 8 x 0.25 mm² Why buy this product  Pre-assembled with litz wires for immediate use  Customer-specific assemblies and litz wire lengths available  Sealed on the litz wire side for optimum leak-tightness  All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design  For high transmission safety: shield connection to the housing with optional EMC nut  SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356097727 Weight per Piece (excluding packing) 28.000 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if 12/22/2016   Page 1 / 6 https://www.phoenixcontact.com/gb/products/1542716 Panel feed-through - SACC-DSI-MS-8CON-PG 9/0,5 SCO - 1542716 Technical data General there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type TPE litz wire Conductor cross section 0.25 mm² AWG signal line 24 Conductor structure signal line 14x 0.15 mm Core diameter including insulation 1.15 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Brown, blue, white, gray, pink, green, yellow, red Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 80 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) 12/22/2016   Page 2 / 6 https://www.phoenixcontact.com/gb/products/1542716 Panel feed-through - SACC-DSI-MS-8CON-PG 9/0,5 SCO - 1542716 Technical data Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing Dimensional drawing Ø15,3 +0,1 PG9 Ø16 45 ° max.4,5 Housing cutout for Pg9 fastening thread, mounting panel with thread 13,5 +0,1 1x45° Housing cutout for Pg9 fastening thread, mounting panel with feedthrough hole (alternatively with surface as protection against rotation) Schematic diagram Dimensional drawing 23 11 PG9 10 M12x1 2 17 18 500 Pin assignment M12 plug, 8-pos., view plug side max. 4,5 M12 flush-type plug 12/22/2016   Page 3 / 6 https://www.phoenixcontact.com/gb/products/1542716 Panel feed-through - SACC-DSI-MS-8CON-PG 9/0,5 SCO - 1542716 Circuit diagram 1 WH 2 BN 3 GN 4 YE 5 GY 6 PK 7 BU 8 RD Contact assignment of the M12 plug Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 39121413 Approvals Approvals Approvals cULus Recognized / UL Recognized / EAC 12/22/2016   Page 4 / 6 https://www.phoenixcontact.com/gb/products/1542716 Panel feed-through - SACC-DSI-MS-8CON-PG 9/0,5 SCO - 1542716 Approvals Ex Approvals Approval details cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E221474-20140616     mm²/AWG/kcmil 24-22 Nominal current IN 2A Nominal voltage UN 30 V UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 26-20 Nominal current IN 2A Nominal voltage UN 30 V EAC      FILE E 118976  B.00767 Accessories Accessories Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     12/22/2016   Page 5 / 6 https://www.phoenixcontact.com/gb/products/1542716 Panel feed-through - SACC-DSI-MS-8CON-PG 9/0,5 SCO - 1542716 Accessories Seal Flat gasket - SACC-PG9-SEAL CLM - 1556320 Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/22/2016   Page 6 / 6