1542729

https://www.phoenixcontact.com/us/products/1542729 Panel feed-through - SACC-DSI-FS-5CON-PG 9/0,5 SCO - 1542729 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 5-pos., M12 SPEEDCON, A-coded, rear/screw mounting with Pg9 thread, with 0.5 m TPE litz wire, 5 x 0.34 mm² Product Features ■ ■ ■ ■ ■ ■ Pre-assembled with litz wires for immediate use Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design For high transmission safety: shield connection to the housing with optional EMC nut SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 25.0 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using 04/04/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1542729 Panel feed-through - SACC-DSI-FS-5CON-PG 9/0,5 SCO - 1542729 Technical data General a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category III Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Black, brown,blue, white, gray Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC 04/04/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1542729 Panel feed-through - SACC-DSI-FS-5CON-PG 9/0,5 SCO - 1542729 Technical data Cable Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 31261501 Approvals Approvals Approvals cULus Recognized / EAC / EAC 04/04/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1542729 Panel feed-through - SACC-DSI-FS-5CON-PG 9/0,5 SCO - 1542729 Approvals Ex Approvals Approvals submitted Approval details cULus Recognized      mm²/AWG/kcmil 20 Nominal current IN 4A Nominal voltage UN 60 V EAC  EAC  Drawings Dimensional drawing ° max.4,5 Housing cutout for Pg9 fastening thread, mounting panel with thread Ø15,3 +0,1 PG9 45 Ø16 Dimensional drawing 13,5 +0,1 1x45° Housing cutout for Pg9 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) 04/04/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1542729 Panel feed-through - SACC-DSI-FS-5CON-PG 9/0,5 SCO - 1542729 Schematic diagram 3 Dimensional drawing 19,6 4 9,5 Pin assignment M12 socket, 5-pos., A-coded, socket side view 2 500 17 1 18 2 PG9 5 !4,5 M12 flush-type connector Circuit diagram 1 BN 2 WH 4 BK 3 BU 5 GY Contact assignment of the M12 socket Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/04/2016   Page 5 / 5