1542758

https://www.phoenixcontact.com/gb/products/1542758 Panel feed-through - SACC-DSI-MS-8CON-L180 SCO - 1542758 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 8-pos., M12 SPEEDCON, rear/screw mounting with Pg9 thread, with straight solder connection Why buy this product ■ ■ ■ Easy PCB assembly: one-piece connectors for wave soldering All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 20 STK Minimum order quantity 20 STK GTIN Weight per Piece (excluding packing) 12.5 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Length of the solder pin 6 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using 08/06/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1542758 Panel feed-through - SACC-DSI-MS-8CON-L180 SCO - 1542758 Technical data General a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With locking nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Standards/specifications M12 connector IEC 61076-2-101 Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Drawings 08/06/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1542758 Panel feed-through - SACC-DSI-MS-8CON-L180 SCO - 1542758 Dimensional drawing Schematic diagram Ø15,3 +0,1 max.4,5 13,5 +0,1 Pin assignment M12 plug, 8-pos., view plug side 1x45° Housing cutout for Pg9 fastening thread, mounting panel with feedthrough hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) Drilling diagram Dimensional drawing 45° 23 10 11 33 ° 3 32 2 PG9 M12x1 4 5 SW17 Ø5,5 7 SW19 3 8 ,0 5 6 ±0,05 max. 4,5 6, Ø0,8 85 + 0, 05 (1 3, Ø6 5 +0, ,6 5 1 ) +0 6x49 ° 1 Ø M12 flush-type plug 18 6, 8 6, 6 Dimensional drawing M12 front view Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 08/06/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1542758 Panel feed-through - SACC-DSI-MS-8CON-L180 SCO - 1542758 Classifications eCl@ss eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 31261501 Approvals Approvals Approvals UL Recognized / EAC / cULus Recognized / EAC Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 2A Nominal voltage UN 30 V EAC  08/06/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1542758 Panel feed-through - SACC-DSI-MS-8CON-L180 SCO - 1542758 Approvals cULus Recognized      mm²/AWG/kcmil 22 Nominal current IN 2A Nominal voltage UN 30 V EAC  Accessories Accessories Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Seal Flat gasket - SACC-PG9-SEAL CLM - 1556320 Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/06/2016   Page 5 / 5