https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Connector, Universal, 5-position, Plug straight M12 SPEEDCON, A-coded, Screw connection, knurl material: Zinc
die-cast, nickel-plated, cable gland Pg7, external cable diameter 4 mm ... 6 mm
Your advantages
Safe use in the field, thanks to a high degree of protection
Flexible: connectors for on-site assembly
Save time, thanks to installation with SPEEDCON fast locking system
Screw connection: proven connection technology for a large selection of different conductors
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356097673
Weight per Piece (excluding packing)
23.500 g
Custom tariff number
85366990
Country of origin
Germany
Technical data
Dimensions
Diameter housing
20 mm
Length
62 mm
External cable diameter
4 mm ... 6 mm
Stripping length of the sheath
20 mm
Stripping length of the individual wire
5 mm
11/06/2019 Page 1 / 11
https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Technical data
Ambient conditions
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Degree of protection
IP67
General
Note
NOTE: Observe the permissible bending radii when laying conductors,
since the degree of protection may be put in jeopardy if the bending forces
are too high. Alleviate mechanical loads upstream of the connector, e.g. by
using cable ties.
Rated current at 40°C
4A
Rated voltage
48 V AC
60 V DC
Number of positions
5
Insulation resistance
≥ 100 MΩ
Coding
A - standard
Standards/regulations
M12 connector IEC 61076-2-101
Signal type/category
Universal
Status display
No
Overvoltage category
II
Degree of pollution
3
Connection method
Screw connection
Conductor cross section
0.25 mm² ... 0.75 mm² (without ferrule)
0.14 mm² ... 0.75 mm² (with ferrule)
0.25 mm² ... 0.75 mm² (solid)
Conductor cross section AWG
24 ... 18 (without ferrule)
26 ... 20 (with ferrule)
Insertion/withdrawal cycles
≥ 100
Torque
0.4 Nm (M12 knurl)
0.2 Nm (Screw terminal blocks)
0.8 Nm ... 1 Nm (Pressure screw with sleeve housing)
Tightening torque
Screw plug insert with sleeve housing as far it will go
Assembly instructions
The wires can be connected both with ferrules and without ferrules
Material
Flammability rating according to UL 94
HB
Contact material
CuZn
Contact surface material
CuSnZn
Contact carrier material
PA
Material of grip body
PBT
Material, knurls
Zinc die-cast, nickel-plated
11/06/2019 Page 2 / 11
https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Technical data
Material
Sealing material
NBR
Standards and Regulations
Standard designation
M12 connector
Standards/regulations
IEC 61076-2-101
Flammability rating according to UL 94
HB
Environmental Product Compliance
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
11/06/2019 Page 3 / 11
https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Schematic diagram
Male/Female M12
11/06/2019 Page 4 / 11
https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Dimensional drawing
Plug, M12 x 1, straight, shielded
11/06/2019 Page 5 / 11
https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Schematic diagram
Cable connection side M12 (screw connection)
11/06/2019 Page 6 / 11
https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Schematic diagram
Pin assignment M12 male connector, 5-pos., A-coded, male side
Classifications
eCl@ss
eCl@ss 10.0.1
27440102
eCl@ss 4.0
27140800
eCl@ss 4.1
27140800
eCl@ss 5.0
27143400
eCl@ss 5.1
27143400
eCl@ss 6.0
27279200
eCl@ss 7.0
27440104
11/06/2019 Page 7 / 11
https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Classifications
eCl@ss
eCl@ss 8.0
27440104
eCl@ss 9.0
27440102
ETIM
ETIM 3.0
EC002062
ETIM 4.0
EC002062
ETIM 5.0
EC002062
ETIM 6.0
EC002062
UNSPSC
UNSPSC 6.01
31261501
UNSPSC 7.0901
31261501
UNSPSC 11
31261501
UNSPSC 12.01
31261501
UNSPSC 13.2
39121413
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approval details
EAC
RU CDE.AI30.B.01102
Accessories
Accessories
Cable by the meter
11/06/2019 Page 8 / 11
https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Accessories
Cable reel - SAC-5P-100,0-PUR/0,34 - 1501676
Cable ring, PUR halogen-free black, 5-pos., conductor colors: Brown/white/blue/black/green-yellow, cable length: 100 m
Cable end sleeve
Ferrule - A 0,25- 5 - 3202465
Ferrule, length: 5 mm, color: silver
Crimping tool
Crimping pliers - CRIMPFOX 6H - 1212046
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry
Protective cap
Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873
M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 plugs
Screwdriver tools
11/06/2019 Page 9 / 11
https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Accessories
Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600
Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits
Tool - SACC BIT M12-D20 - 1208445
Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive
Seal
Connector - SACC-M12-SET/2,5-3,5 - 1436505
Sensor/actuator connector, accessories, pressure screw and Pg7 seal, for unshielded M12 connector, cable diameter 2.5
mm - 3.5 mm
Stripping tool
Stripping tool - WIREFOX SAC - 1212623
Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7
mm, any stripping length
Torque tool
11/06/2019 Page 10 / 11
https://www.phoenixcontact.com/us/products/1542965
Connector - SACC-MS-5CON-PG 7-M SCO - 1542965
Accessories
Torque screwdriver - TSD 04 SAC - 1208429
Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors
Torque screwdriver - TSD-M 1,2NM - 1212224
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
11/06/2019 Page 11 / 11
