1543223

https://www.phoenixcontact.com/us/products/1543223 Bus system connector - SACC-M12MSD-4Q SH - 1543223 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bus system connector, Ethernet CAT5 (100 Mbps), 4-position, shielded, Plug straight M12, D-coded, Insulation displacement connection, knurl material: Nickel-plated brass, external cable diameter 4 mm ... 8 mm Your advantages  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Insulation displacement connection: innovative and time-saving assembly without stripping the single wire  Reliable signal transmission - 360° shielding in environments with electromagnetic interference Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356097383 Weight per Piece (excluding packing) 47.400 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Length 61 mm External cable diameter 4 mm ... 8 mm Stripping length of the sheath 35 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C 11/07/2019   Page 1 / 8 https://www.phoenixcontact.com/us/products/1543223 Bus system connector - SACC-M12MSD-4Q SH - 1543223 Technical data Ambient conditions Degree of protection IP67 General Note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Rated current at 40°C 1.75 A Rated voltage 48 V AC 60 V DC Number of positions 4 Insulation resistance ≥ 100 MΩ Coding D - data Standards/regulations M12 connector according to IEC 61076-2-101 Signal type/category Ethernet CAT5 (on the basis of IEC 11801), 100 Mbps Status display No Overvoltage category II Degree of pollution 3 Connection method Insulation displacement connection Conductor cross section 0.14 mm² ... 0.34 mm² Conductor cross section AWG 26 ... 22 Wire diameter including insulation 1 mm ... 1.6 mm Frequency of connections between conductors of the same cross section ≥ 10 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.8 Nm (Connector with coupling sleeve) 3 Nm (Pressure nut with coupling sleeve) Material Flammability rating according to UL 94 V0 Contact material CuSn Contact surface material Ni/Au Contact carrier material PA6 Material of grip body Zinc die-cast, nickel-plated Material, knurls Nickel-plated brass Sealing material Neoprene Standards and Regulations Standard designation M12 connector Standards/regulations according to IEC 61076-2-101 11/07/2019   Page 2 / 8 https://www.phoenixcontact.com/us/products/1543223 Bus system connector - SACC-M12MSD-4Q SH - 1543223 Technical data Standards and Regulations Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing Plug, M12 x 1, straight, shielded 11/07/2019   Page 3 / 8 https://www.phoenixcontact.com/us/products/1543223 Bus system connector - SACC-M12MSD-4Q SH - 1543223 Schematic diagram Pin assignment M12 male connector, 4-pos., D-coded, male side Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 11/07/2019   Page 4 / 8 https://www.phoenixcontact.com/us/products/1543223 Bus system connector - SACC-M12MSD-4Q SH - 1543223 Classifications eCl@ss eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 ETIM 6.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC / EAC Ex Approvals Approval details EAC  EAC      RU CDE.AI30.B.01102     EAC-Zulassung Accessories Accessories 11/07/2019   Page 5 / 8 https://www.phoenixcontact.com/us/products/1543223 Bus system connector - SACC-M12MSD-4Q SH - 1543223 Accessories Data cable by the meter Network cable - VS-OE-OE-93E/... - 1417320 Network cable, Ethernet CAT5 (100 Mbps), 4-position, PUR halogen-free, water blue RAL 5021, shielded, free cable end, on free cable end, cable length: Free input (0.5 ... 100 m)     Electronics pliers Diagonal cutter - MICROFOX-SB - 1212489 Electronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component grip, cutting capacity: soft 0.2 - 2.0 mm; medium hard 1.2 mm; hard 0.5 mm diameter     Protective cap Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 plugs     Screwdriver tools Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     11/07/2019   Page 6 / 8 https://www.phoenixcontact.com/us/products/1543223 Bus system connector - SACC-M12MSD-4Q SH - 1543223 Accessories Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Shield connection Shielding foil - ALU-SB - 1404531 Shielding foil, for fixing the braided shield of shielded cables. Length: 4 cm, width: 1.2 cm     Stripping tool Stripping tool - WIREFOX-D 40 - 1212161 Stripping tool, for stripping cables of 4.5 mm ‑ 40 mm‑Ø, insulation thickness of up to 4.5 mm, pivoting blade for round, lengthwise, and spiral cuts     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     11/07/2019   Page 7 / 8 https://www.phoenixcontact.com/us/products/1543223 Bus system connector - SACC-M12MSD-4Q SH - 1543223 Accessories Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Torque screwdriver - TSD 08 SAC - 1212597 Torque screw driver with preset torque of 0.8 Nm, with 4 mm hexagon for accommodating SAC bits, two-component handle with non-slip grip     Stripping tool - VS-CABLE-STRIP-VARIO - 1657407 Stripping tool, for the multi-level stripping of shielded cables     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 11/07/2019   Page 8 / 8