1543676

https://www.phoenixcontact.com/us/products/1543676 Panel feed-through - SACC-DSI-FSB-5CON-PG9/ 0,5 SCO - 1543676 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type socket, 5-pos., M12 SPEEDCON, B-coded, rear/screw mounting with Pg9 thread, with 0.5 m TPE litz wire, 5 x 0.34 mm² Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 25.2 GRM Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Number of positions 5 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ 04/29/2014   Page 1 / 6 https://www.phoenixcontact.com/us/products/1543676 Panel feed-through - SACC-DSI-FSB-5CON-PG9/ 0,5 SCO - 1543676 Technical data General Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category II Pollution degree 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With flat nut Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Black, brown,blue, white, gray Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) 04/29/2014   Page 2 / 6 https://www.phoenixcontact.com/us/products/1543676 Panel feed-through - SACC-DSI-FSB-5CON-PG9/ 0,5 SCO - 1543676 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 31261501 Approvals Approvals Approvals UL Recognized / GOST / GOST Ex Approvals Approvals submitted Approval details 04/29/2014   Page 3 / 6 https://www.phoenixcontact.com/us/products/1543676 Panel feed-through - SACC-DSI-FSB-5CON-PG9/ 0,5 SCO - 1543676 Approvals UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V GOST  GOST  Accessories Accessories Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors     04/29/2014   Page 4 / 6 https://www.phoenixcontact.com/us/products/1543676 Panel feed-through - SACC-DSI-FSB-5CON-PG9/ 0,5 SCO - 1543676 Accessories Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry     Seal Flat gasket - SACC-PG9-SEAL CLM - 1556320 Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads     Drawings Dimensioned drawing Dimensioned drawing Ø15,3 +0,1 Ø16 PG9 45 ° max.4,5 Housing cutout for Pg9 fastening thread, mounting panel with thread 13,5 +0,1 1x45° Housing cutout for Pg9 fastening thread, mounting panel with feedthrough hole (alternatively with surface as protection against rotation) Schematic diagram 18 4 6,5 1 18 2 9,5 2 500 PG9 5 17 3 Dimensioned drawing Pin assignment M12 socket, 5-pos., B-coded, female side max. 4,5 M12 flush-type connector 04/29/2014   Page 5 / 6 https://www.phoenixcontact.com/us/products/1543676 Panel feed-through - SACC-DSI-FSB-5CON-PG9/ 0,5 SCO - 1543676 Circuit diagram 1 BN 2 WH 4 BK 3 BU 5 GY Contact assignment of the M12 socket Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 04/29/2014   Page 6 / 6