1551422

https://www.phoenixcontact.com/us/products/1551422 Flush-type connector - SACC-CI-M12FS-8CON-L180-THR SH - 1551422 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 8-pos., with straight THR solder connection, only contact insert   Key Commercial Data Packing unit 1 pc Minimum order quantity 60 pc Weight per Piece (excluding packing) 4.33 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 12/01/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/1551422 Flush-type connector - SACC-CI-M12FS-8CON-L180-THR SH - 1551422 Technical data General Status display No Overvoltage category II Pollution degree 3 Connection method THR solder connection Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type PCB mounting Type of packaging Tray Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PPA Sealing material FKM / EPDM Cable Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 12/01/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/1551422 Flush-type connector - SACC-CI-M12FS-8CON-L180-THR SH - 1551422 Classifications ETIM ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / EAC Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 2A Nominal voltage UN 30 V EAC  Drawings 12/01/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/1551422 Flush-type connector - SACC-CI-M12FS-8CON-L180-THR SH - 1551422 Schematic diagram Drilling diagram Ø5,5 49 ° Ø1 4,5 Pin assignment M12 socket, 8-pos., A-coded, view female side 8,5 Ø1,4 7,05 5 6x 66° Ø1 Drilling diagram Dimensional drawing 17 2,5 1,5 Ø0,8 Ø8,25 M12 female connector contact carrier Dimensional drawing 230 20 28 6 155 22 5,2 THR tray packaging Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/01/2015   Page 4 / 4