1551532

https://www.phoenixcontact.com/us/products/1551532 Bus system flat-type plug - SACC-DSI-MSD-4CON-PG9/0,5 SCO - 1551532 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Bus system flush-type plug, PROFINET, 4-pos., M12 SPEEDCON, D-coded, front/screw mounting with Pg9 thread, with 0.5 m TPE litz wire, 4 x 0.34 mm²       Key commercial data Packing unit 11 Weight per Piece (excluding packing) 0.02 GRM Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) Rated current at 40°C 4A Rated voltage 250 V Number of positions 4 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding D - data 29.10.2013   Page 1 / 5 https://www.phoenixcontact.com/us/products/1551532 Bus system flat-type plug - SACC-DSI-MSD-4CON-PG9/0,5 SCO - 1551532 Technical data General Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category II Pollution degree 3 Connection method Individual wires Mounting type Rear mounting Pg9 With flat nut Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Yellow, orange, white, blue Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -25 °C ... 85 °C (cable, fixed installation) Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 29.10.2013   Page 2 / 5 https://www.phoenixcontact.com/us/products/1551532 Bus system flat-type plug - SACC-DSI-MSD-4CON-PG9/0,5 SCO - 1551532 Classifications eCl@ss eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 31261501 Approvals Approvals Approvals UL Recognized / GOST / GOST Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 250 V 29.10.2013   Page 3 / 5 https://www.phoenixcontact.com/us/products/1551532 Bus system flat-type plug - SACC-DSI-MSD-4CON-PG9/0,5 SCO - 1551532 Approvals GOST  GOST  Drawings Dimensioned drawing Dimensioned drawing Ø15,3 +0,1 PG9 Ø16 45 ° max.4,5 Housing cutout for Pg9 fastening thread, mounting panel with thread 13,5 +0,1 1x45° Housing cutout for Pg9 fastening thread, mounting panel with feedthrough hole (alternatively with surface as protection against rotation) Schematic diagram 4 1 Circuit diagram 3 1 YE 2 WH 3 OG 4 BU 2 Pin assignment M12 male connector, 4-pos., D-coded, male side Contact assignment of the M12 plug and the M12 socket 29.10.2013   Page 4 / 5 https://www.phoenixcontact.com/us/products/1551532 Bus system flat-type plug - SACC-DSI-MSD-4CON-PG9/0,5 SCO - 1551532 Dimensioned drawing 23 PG9 11 10 M12x1 2 17 18 500 max. 4,5 M12 flush-type plug © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 29.10.2013   Page 5 / 5