1551684

https://www.phoenixcontact.com/us/products/1551684 Panel feed-through - SACC-5P-DSI-M12MSB/FSB-M16 - 1551684 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator control cabinet feed-through, male to female, 5-pos., M12, shielded, B-coded, bipolar/screw mounting with M16 thread Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 31.0 GRM Custom tariff number 85366990 Country of origin Czech Republic Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Number of positions 5 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 Signal type/category Universal 2/25/14   Page 1 / 5 https://www.phoenixcontact.com/us/products/1551684 Panel feed-through - SACC-5P-DSI-M12MSB/FSB-M16 - 1551684 Technical data General Status display No Surge voltage category II Pollution degree 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Einbauseitig) Mounting type Bipolar mounting M16 x 1.5 Material Inflammability class according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Nickel-plated brass Sealing material FKM Cable Conductor cross section 0.34 mm² Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 2/25/14   Page 2 / 5 https://www.phoenixcontact.com/us/products/1551684 Panel feed-through - SACC-5P-DSI-M12MSB/FSB-M16 - 1551684 Classifications ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals GOST Ex Approvals Approvals submitted Approval details GOST  Accessories Accessories Protective cap 2/25/14   Page 3 / 5 https://www.phoenixcontact.com/us/products/1551684 Panel feed-through - SACC-5P-DSI-M12MSB/FSB-M16 - 1551684 Accessories Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Seal Flat gasket - SACC-M16-SEAL CLM - 1430394 M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread     2/25/14   Page 4 / 5 https://www.phoenixcontact.com/us/products/1551684 Panel feed-through - SACC-5P-DSI-M12MSB/FSB-M16 - 1551684 Drawings Dimensioned drawing Schematic diagram 2,0...4,0 4 3 5 1 +0,1 ø 16,1 2 Pin assignment M12 male connector, 5-pos., B-coded, male side 0,2 x 45° Panel cutout Schematic diagram 4 35 10 Ø14 1 SW18 2 3 M12x1 10,5 5 Pin assignment M12 socket, 5-pos., B-coded, female side M16x1,5 3 Dimensioned drawing max. 4,5 Circuit diagram 1 1 2 2 4 4 3 3 5 5 Contact assignment of the M12 plug and the M12 socket © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 2/25/14   Page 5 / 5