1551914

https://www.phoenixcontact.com/us/produkte/1551914 Panel feed-through - SACC-DSI-MS-8CON-M12/0,5 SCO - 1551914 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type connector, 8-pos., M12 SPEEDCON, rear/screw mounting with M12 thread, with 0.5 m TPE litz wire, 8 x 0.25 mm2     Key commercial data Packing unit 0 Minimum order quantity 1 Catalog page Page 43 (PC-2011) GTIN Custom tariff number 85444290 Country of origin GERMANY Technical data General data Rated current at 40°C 2A Rated voltage 30 V Number of positions 8 Volume resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Length of cable 0.5 m Ambient temperature (operation) -25 °C ... 85 °C (Male connector / female connector) General characteristics Standards/regulations M12 plug-in connector IEC 61076-2-101 Coding A - standard Surge voltage category II Pollution degree 3 Degree of protection IP67 Contact material CuZn Contact surface material Au 05.10.2012   Page 1 / 3 https://www.phoenixcontact.com/us/produkte/1551914 Panel feed-through - SACC-DSI-MS-8CON-M12/0,5 SCO - 1551914 Technical data General characteristics Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Mounting type Rear mounting M12 x 1 With flat nut Connection method Individual wires Status display No Conductor data Cable type TPE litz wire Conductor cross section 0.25 mm² AWG signal line 24 Conductor structure signal line 14x 0.15 mm Core diameter including insulation 1.15 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Brown, blue, white, gray, pink, green, yellow, red Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 80 mΩ/m Nominal voltage, conductor 300 V Test voltage, conductor 2000 V AC Ambient temperature (operation) -25 °C ... 85 °C (cable, fixed installation) Classifications eclass eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 etim ETIM 3.0 EC002061 ETIM 4.0 EC002061 unspsc UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 05.10.2012   Page 2 / 3 https://www.phoenixcontact.com/us/produkte/1551914 Panel feed-through - SACC-DSI-MS-8CON-M12/0,5 SCO - 1551914 Classifications unspsc UNSPSC 13.2 31261501 Drawings Dimensioned drawing Dimensioned drawing Ø12,2 +0,1 M12x1 max.4,0 Housing cutout for M12 fastening thread, mounting panel with thread 11+0,1 Housing cutout for M12 fastening thread, mounting panel with feedthrough hole (alternative with surface as protection against rotation) Schematic diagram Dimensioned drawing 5 20 6 4 8 2 2 SW14 3 M12x1 1 2,5 SW15 7 500 Pin assignment M12 plug, 8-pos., view plug side max. 4,5 M12 flush-type connector Circuit diagram 1 WH 2 BN 3 GN 4 YE 5 GY 6 PK 7 BU 8 RD Contact assignment of the M12 plug and the M12 socket © Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 05.10.2012   Page 3 / 3