1552230

https://www.phoenixcontact.com/us/products/1552230 Flush-type connector - SACC-CI-M12MSB-5CON-L180 THR - 1552230 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 5-pos., B-coded, with straight THR solder connection, only contact insert   Key Commercial Data Packing unit 1 pc Minimum order quantity 60 pc Weight per Piece (excluding packing) 3.45 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 5 Insulation resistance ≥ 100 MΩ Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 12/21/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/1552230 Flush-type connector - SACC-CI-M12MSB-5CON-L180 THR - 1552230 Technical data General Status display No Overvoltage category II Pollution degree 3 Connection method THR solder connection Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type PCB mounting Type of packaging Tray Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Sealing material FKM / EPDM Cable Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 12/21/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/1552230 Flush-type connector - SACC-CI-M12MSB-5CON-L180 THR - 1552230 Classifications ETIM ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V cUL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A 12/21/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/1552230 Flush-type connector - SACC-CI-M12MSB-5CON-L180 THR - 1552230 Approvals     Nominal voltage UN 60 V EAC  cULus Recognized  Drawings Schematic diagram 4 Drilling diagram Ø5 3 Ø1,2 5 45 ° 5 2 4,5 1 Pin assignment M12 male connector, 5-pos., Bcoded, male side Ø1,4 8,5 Drilling diagram Dimensional drawing 18,8 2,5 Ø9,3 Ø1 1,5 M12 male connector contact carrier 12/21/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/1552230 Flush-type connector - SACC-CI-M12MSB-5CON-L180 THR - 1552230 Dimensional drawing 230 20 28 6 155 22 5,2 THR tray packaging Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/21/2015   Page 5 / 5