1553624

https://www.phoenixcontact.com/us/products/1553624 Bus system connector - SACC-M12MRD-4Q SH - 1553624 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bus system connector, Ethernet CAT5 (100 Mbps), 4-position, shielded, Plug angled M12, D-coded, Insulation displacement connection, Knurl material: Nickel-plated brass, External cable diameter 4 mm ... 8 mm Product Features ■ ■ ■ ■ Safe use in the field, thanks to a high degree of protection Flexible: connectors for on-site assembly Insulation displacement connection: innovative and time-saving assembly without stripping the single wire Reliable signal transmission - 360° shielding in environments with electromagnetic interference Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 47.9 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions External diameter 4 mm ... 8 mm Stripping length of the sheath 35 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Degree of protection IP67 General Rated current at 40°C 1.75 A Rated voltage 60 V DC 48 V AC Number of positions 4 03/29/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1553624 Bus system connector - SACC-M12MRD-4Q SH - 1553624 Technical data General Insulation resistance ≥ 100 MΩ Coding D - data Standards/regulations M12 connector IEC 61076-2-101 Signal type/category Ethernet CAT5 (IEC 11801), 100 Mbps Status display No Overvoltage category II Degree of pollution 3 Connection method Insulation displacement connection Conductor cross section 0.14 mm² ... 0.34 mm² Conductor cross section AWG 26 ... 22 Wire diameter incl. insulation ≤ 1.6 mm Frequency of connections between conductors of the same cross section ≤ 10 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.8 Nm (Connector with coupling sleeve) 3 Nm (Pressure nut with coupling sleeve) Assembly instructions The connector pin assignment can be rotated 45° to the cable outlet Material Flammability rating according to UL 94 V0 Contact material CuSn Contact surface material Ni/Au Contact carrier material PA 66 Material of grip body Zinc die-cast, nickel-plated Material, knurls Nickel-plated brass Sealing material Neoprene Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 03/29/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1553624 Bus system connector - SACC-M12MRD-4Q SH - 1553624 Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals EAC / EAC Ex Approvals Approvals submitted Approval details EAC  EAC  Drawings 03/29/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1553624 Bus system connector - SACC-M12MRD-4Q SH - 1553624 Schematic diagram Dimensional drawing Ø19 ca. 50 M12 Pin assignment M12 socket, 4-pos., D-coded, female side SW 13 ca. 41 M12 x 1 male plug, angled Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/29/2016   Page 4 / 4