https://www.phoenixcontact.com/us/products/1554681
Flush-type connector - SACC-DSI-M12MS-5CON-PG9/0,5 VA - 1554681
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type plug, 5-pos., M12, A-coded, rear/screw mounting with Pg9 thread, with 0.5 m TPE litz
wire, 5 x 0.34 mm², stainless steel version
Why buy this product
Pre-assembled with litz wires for immediate use
Customer-specific assemblies and litz wire lengths available
Sealed on the litz wire side for optimum leak-tightness
Standard pin assignments and codings for signal transmission with a uniform design-in design
For high transmission safety: shield connection to the housing with optional EMC nut
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4046356170383
Weight per Piece (excluding packing)
24.200 g
Custom tariff number
85366990
Country of origin
Germany
Technical data
Dimensions
Length of cable
0.5 m
Ambient conditions
Ambient temperature (operation)
-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
03/27/2018 Page 1 / 6
https://www.phoenixcontact.com/us/products/1554681
Flush-type connector - SACC-DSI-M12MS-5CON-PG9/0,5 VA - 1554681
Technical data
Ambient conditions
Degree of protection
IP67
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C
4A
Rated voltage
60 V
Rated surge voltage
1.5 kV
Number of positions
5
Insulation resistance
≥ 100 MΩ
Coding
A - standard
Standards/regulations
M12 connector IEC 61076-2-101
Status display
No
Overvoltage category
II
Degree of pollution
3
Connection method
Individual wires
Insertion/withdrawal cycles
> 100
Torque
3 Nm ... 4 Nm (Installation-side)
Mounting type
Rear mounting Pg9 With flat nut
Material
Flammability rating according to UL 94
V0
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PA 6.6
Material, knurls
Stainless steel
Sealing material
FKM
Cable
Cable type
TPE litz wire
Conductor cross section
0.34 mm²
AWG signal line
22
Conductor structure signal line
7x 0.25 mm
Core diameter including insulation
1.2 mm ±0.07 mm
Thickness, insulation
0.21 mm
Wire colors
Black, brown,blue, white, gray
Material conductor insulation
TPE
03/27/2018 Page 2 / 6
https://www.phoenixcontact.com/us/products/1554681
Flush-type connector - SACC-DSI-M12MS-5CON-PG9/0,5 VA - 1554681
Technical data
Cable
Conductor material
Tin-plated Cu litz wires
Standards/specifications
M12 connector IEC 61076-2-101
Insulation resistance
≥ 20 MΩ*km
Conductor resistance
≤ 57.6 mΩ/m
Nominal voltage, cable
300 V
Test voltage, cable
2000 V AC
Ambient temperature (operation)
-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (cable, flexible installation)
Standards and Regulations
Standard designation
M12 connector
Standards/regulations
IEC 61076-2-101
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Dimensional drawing
max.4,5
Schematic diagram
4
3
Ø15,3 +0,1
5
13,5 +0,1
1x45°
1
2
Pin assignment M12 male connector, 5-pos., A-coded, male side
Housing cutout for Pg9 fastening thread, mounting panel with feed-through
hole (alternatively with surface as protection against rotation)
03/27/2018 Page 3 / 6
https://www.phoenixcontact.com/us/products/1554681
Flush-type connector - SACC-DSI-M12MS-5CON-PG9/0,5 VA - 1554681
Dimensional drawing
Circuit diagram
23
PG9
11
10
M12x1
2
17
18
500
1
BN
2
WH
4
BK
3
BU
5
GY
≤4,5
M12 flush-type plug
Contact assignment of the M12 plug and the M12 socket
Classifications
eCl@ss
eCl@ss 4.0
27250313
eCl@ss 4.1
27250313
eCl@ss 5.0
27143423
eCl@ss 5.1
27143423
eCl@ss 6.0
27143423
eCl@ss 7.0
27449001
eCl@ss 8.0
27440103
eCl@ss 9.0
27440102
ETIM
ETIM 3.0
EC002061
ETIM 4.0
EC002062
ETIM 5.0
EC002061
ETIM 6.0
EC002061
UNSPSC
UNSPSC 6.01
31251501
UNSPSC 7.0901
31251501
UNSPSC 11
31251501
UNSPSC 12.01
31251501
UNSPSC 13.2
39121413
Approvals
Approvals
03/27/2018 Page 4 / 6
https://www.phoenixcontact.com/us/products/1554681
Flush-type connector - SACC-DSI-M12MS-5CON-PG9/0,5 VA - 1554681
Approvals
Approvals
cULus Recognized / EAC
Ex Approvals
Approval details
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
mm²/AWG/kcmil
22-20
Nominal current IN
4A
Nominal voltage UN
60 V
EAC
E221474-20140616
B.01742
Accessories
Accessories
Protective cap
Sealing cap - PROT-M12 FS - 1560251
M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field
Sealing cap - PROT-M12 FS-M - 1430488
M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the
field
03/27/2018 Page 5 / 6
https://www.phoenixcontact.com/us/products/1554681
Flush-type connector - SACC-DSI-M12MS-5CON-PG9/0,5 VA - 1554681
Accessories
Seal
Flat gasket - SACC-PG9-SEAL CLM - 1556320
Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
03/27/2018 Page 6 / 6
很抱歉,暂时无法提供与“1554681”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 1+314.990311+39.07440
- 10+306.9674910+38.07918
- 25+286.1961125+35.50250
- 50+279.0470450+34.61566