1554733

https://www.phoenixcontact.com/gb/products/1554733 Flush-type connector - SACC-DSI-M12FS-5CON-L180 VA - 1554733 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 5-pos., M12, A-coded, rear/screw mounting with Pg9 thread, with straight solder connection, high-grade steel version Why buy this product ■ ■ Easy PCB assembly: one-piece connectors for wave soldering All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design Key Commercial Data Packing unit 20 STK Minimum order quantity 20 STK GTIN Weight per Piece (excluding packing) 15.57 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Length of the solder pin 6 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 IP69K General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using 08/06/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1554733 Flush-type connector - SACC-DSI-M12FS-5CON-L180 VA - 1554733 Technical data General a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category III Degree of pollution 3 Test voltage 1.5 kV Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Stainless steel Sealing material FKM Cable Standards/specifications M12 connector IEC 61076-2-101 Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Drawings 08/06/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1554733 Flush-type connector - SACC-DSI-M12FS-5CON-L180 VA - 1554733 Dimensional drawing Schematic diagram max.4,5 3 4 Ø15,3 +0,1 5 13,5 +0,1 1x45° 2 1 Pin assignment M12 socket, 5-pos., A-coded, socket side view Mounting cutout with polarization for Pg9 thread Drilling diagram Dimensional drawing 20 Ø5 10,5 2 3 3 PG 9 Ø15,2 7,5 Ø1 M12 flush-type connector max. 4,5 M12 flush-type socket Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 08/06/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1554733 Flush-type connector - SACC-DSI-M12FS-5CON-L180 VA - 1554733 Approvals Approvals Approvals EAC / cULus Recognized / EAC / EAC Ex Approvals Approvals submitted Approval details EAC  cULus Recognized      mm²/AWG/kcmil 20 Nominal current IN 4A Nominal voltage UN 60 V EAC  EAC  Accessories Accessories Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     08/06/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1554733 Flush-type connector - SACC-DSI-M12FS-5CON-L180 VA - 1554733 Accessories Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry     Seal Flat gasket - SACC-PG9-SEAL CLM - 1556320 Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/06/2016   Page 5 / 5