1580150

https://www.phoenixcontact.com/us/products/1580150 Terminal adapter - HC-D 40-A-TWIN-PEL-M - 1580150 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON terminal adapter male insert, D40 series, 40-pos., right PE connection for the left side of the control cabinet, push-in connection Figure shows the version for the right wall of the control cabinet   Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 222.22 g Custom tariff number 85366990 Country of origin Poland Technical data Dimensions Drill hole distance, horizontal 77.5 mm Height 139.3 mm Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C Electrical characteristics Note For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B16 type Number of positions 40 Rated voltage (III/3) 250 V Rated surge voltage 6 kV Rated current 10 A Mechanical characteristics Type B16 12/28/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/1580150 Terminal adapter - HC-D 40-A-TWIN-PEL-M - 1580150 Technical data Mechanical characteristics Connection method Push-in connection Stripping length of the individual wire 10 mm Conductor cross section 0.5 mm² ... 2.5 mm² Connection cross section AWG 22 ... 12 General Contact material Copper alloy Contact surface material Ag Contact carrier material PA Standards/regulations PA: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2) PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) Pollution degree 3 Overvoltage category III Flammability rating according to UL 94 V0 Assembly instructions Use ferrules. 0.5 mm² ... 2.5 mm² with or without insulating collar, length: 10 mm, stripping length: 10 mm, SZF 1-0,6x3,5 screwdriver Installation instructions Connectors may be plugged in only when there is no load/voltage. Not for HC-B 16-AMQ-EMV housings Standards and Regulations Constructional and testing regulations DIN EN 61984 DIN EN 60664 IEC 60352 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440205 ETIM ETIM 3.0 EC000438 12/28/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/1580150 Terminal adapter - HC-D 40-A-TWIN-PEL-M - 1580150 Classifications ETIM ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals EAC Ex Approvals Approvals submitted Approval details EAC  Drawings 12/28/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/1580150 Terminal adapter - HC-D 40-A-TWIN-PEL-M - 1580150 Dimensional drawing Application drawing 34 PEL 27 20 2,5 PER ! ! 78,3 25 Side view Mounting position PE connection left/right (PEL/PER) Dimensional drawing 12 83 3 10 8 77,5 2 6 4 1 1 = 1 mm² 2 = 1,5 mm² 3 = 2,5 mm² 2 0 0 20 40 60 80 139,3 Current carrying capacity [A] Diagram 100 Ambient temperature [°C] Derating diagram 5,05 11,9 56 Connection side Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/28/2015   Page 4 / 4