1580215

https://www.phoenixcontact.com/us/products/1580215 Terminal adapter - HC-D 64-A-TWIN-PER-M - 1580215 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) HEAVYCON terminal adapter male insert, D64 series, 64-pos., left PE connection for the right side of the control cabinet, Push-in connection Key commercial data Packing unit 1 PCE Weight per Piece (excluding packing) 620.0 GRM Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Drill hole distance, horizontal 104 mm Height 139.3 mm Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C Electrical characteristics Note For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B24 type Number of positions 64 Rated voltage (III/3) 250 V Rated surge voltage 6 kV Rated current 10 A Mechanical characteristics Design B24 Connection method Push-in connection Stripping length of the individual wire 10 mm 21.11.2013   Page 1 / 5 https://www.phoenixcontact.com/us/products/1580215 Terminal adapter - HC-D 64-A-TWIN-PER-M - 1580215 Technical data Mechanical characteristics Conductor cross section 0.5 mm² ... 2.5 mm² Connection cross section AWG 22 ... 12 General Contact material Copper alloy Contact surface material Ag Contact carrier material PA Pollution degree 3 Surge voltage category III Inflammability class according to UL 94 V0 Assembly instructions Use ferrules. 0.5 mm² ... 2.5 mm² with or without insulating collar, length: 10 mm, stripping length: 10 mm, SZF 1-0,6x3,5 screwdriver Installation instructions Connectors may be plugged in only when there is no load/voltage. Not for HC-B 24-AMQ-EMV housings Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440209 ETIM ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 21.11.2013   Page 2 / 5 https://www.phoenixcontact.com/us/products/1580215 Terminal adapter - HC-D 64-A-TWIN-PER-M - 1580215 Accessories Accessories Coding element Coding element - HC-CST - 1676857 Coding peg for coding up to 16 connectors     Coding element - HC-CBU - 1676860 Coding socket for coding up to 16 connectors     Coding bolt - HC-CB - 1772722 Coding pin, prevents mismating of up to six connectors with an identical number of positions     Mounting material Foot element - HC-KA-FE - 1775240 Foot element, for mounting on DIN rail NS 32, DIN rail NS 35/7.5 or DIN rail NS 35/15, can be inserted between basic and side element     21.11.2013   Page 3 / 5 https://www.phoenixcontact.com/us/products/1580215 Terminal adapter - HC-D 64-A-TWIN-PER-M - 1580215 Accessories Locking screw barrel - HC-VSH - 1660083 Locking screw barrel, for a firm connection of contact inserts and DIN-rail mountable terminal adapters     Mounting material - HC-B-PES - 1604997 PE screw, for contact inserts HC-B / HC-BB / HC-DD / HC-D40 / HC-D64     PE multiplier - HC-B-3PE - 1644326 PE multiplier, for three PE connections, for HC-B (besides HC-B..E..ZZ) / HC-BB / HC-DD / HC-D40 / HC-D64 contact inserts     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm     21.11.2013   Page 4 / 5 https://www.phoenixcontact.com/us/products/1580215 Terminal adapter - HC-D 64-A-TWIN-PER-M - 1580215 Accessories Drawings Dimensioned drawing Diagram Current carrying capacity [A] 34 27 20 18 16 14 12 10 8 6 4 2 12,50mm2 31,00mm 2 2 2 21,50mm 40,75mm 0 30 0 10 50 1 3 2 4 70 90 110 130 Ambient temperature [°C] 20 2,5 Derating diagram 78,3 25 Side view Dimensioned drawing 110 139,3 104 5,05 11,9 86,3 Connection side © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 21.11.2013   Page 5 / 5