1580486

https://www.phoenixcontact.com/us/products/1580486 Housing - HC-B 10-TMS-100/O1STM25G-EEE - 1580486 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) HEAVYCON ADVANCE sleeve housing B10, with high-grade steel screw locking (hexagonal socket-head), salt water resistant aluminum, height 100 mm, with thread, 1xM25, straight cable outlet, without surface; conductive seal (EMC properties) Key commercial data Packing unit 1 PCE Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Height 100 mm Width 57 mm Length 105 mm Length of the assembly cutout 65 mm Width of the assembly cutout 35 mm Ambient conditions Schutzart Gehäuse (IP) IP65 IP68 (0.2 bar/24 h) IP69K Ambient temperature (operation) -40 °C ... 125 °C General Note For contact inserts HC-B10, BB18, DD42, M, K8/24 Design B10 Housing type Sleeve housings 21.11.2013   Page 1 / 6 https://www.phoenixcontact.com/us/products/1580486 Housing - HC-B 10-TMS-100/O1STM25G-EEE - 1580486 Technical data General Locking type Screw locking Torque 3 Nm (Locking screw) Fixing screws M6 (screw head: 5 mm Allen screw) No. of cable exits 1 Cable exit Straight Screw connection None Type of the screw connection 1x M25 Housing material Die-cast aluminum, salt water resistant Housing surface material Uncoated Seal material NBR, conductive Material lock High-grade steel Assembly instructions In order to guarantee that the ground conductor contact functions even when plugged in at an angle, the two panel mounting flanges must have sufficient electrical contact with the metal mounting panel. Connection To ensure optimum shielding, any insulating power coating must be removed from the profile gasket area on the control cabinet panel. Tightening torque of locking screw: 3 Nm. Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27261203 eCl@ss 7.0 27440202 eCl@ss 8.0 27440202 ETIM ETIM 2.0 EC000437 ETIM 3.0 EC000437 ETIM 4.0 EC000437 ETIM 5.0 EC000437 UNSPSC UNSPSC 6.01 31261502 UNSPSC 7.0901 31261502 UNSPSC 11 31261502 21.11.2013   Page 2 / 6 https://www.phoenixcontact.com/us/products/1580486 Housing - HC-B 10-TMS-100/O1STM25G-EEE - 1580486 Classifications UNSPSC UNSPSC 12.01 31261502 UNSPSC 13.2 31261502 Accessories Accessories Full screw connection Cable gland - HC-K-KV-M25(11-17) - 1690639 Plastic screw connection up to 5 bar, thread length: 8 mm, cable diameter: 11 - 17 mm, WAF 29, screw connection: M25     Cable gland - HC-M-KV-M25(11-16) - 1690574 Metal screw connection up to 5 bar, thread length: 7 mm, cable diameter: 11 - 16 mm, WAF 27, screw connection: M25     Cable gland - HC-M-KV-M25(14-21) - 1646007 Metal screw connection up to 5 bar, thread length: 7 mm, cable diameter: 14 - 21 mm, WAF 34, screw connection: M25     Cable gland - HC-EMV-KV-M25(9-16,5) - 1690516 EMC screw connection up to 5 bar, thread length: 7.5 mm, cable diameter: 9.0 - 16.5 mm, WAF 29, screw connection: M25     21.11.2013   Page 3 / 6 https://www.phoenixcontact.com/us/products/1580486 Housing - HC-B 10-TMS-100/O1STM25G-EEE - 1580486 Accessories Cable gland - HC-M-KV-M25(1ASI) - 1584020 Metal screw connection for an AS-Interface flat-ribbon conductor, thread type M25     Multiple screw connection Cable gland - HC-M-KV-M25(1X10/1X11) - 1580228 Special cable screw connection M25, brass nickel-plated, grommet with 10 mm and 11 mm holes     Panel mounting flange Mounting flange - HC-B-AF - 1686533 Panel mounting flange for HEAVYCON-ADVANCE TMS housing with screw locking     Mounting flange - HC-B-AF-SET - 1604638 Panel mounting flange for screw locking, set comprising 2 panel mounting flanges with 4 self-tapping Torx® head screws and 4 fan-type washers     Protective cover 21.11.2013   Page 4 / 6 https://www.phoenixcontact.com/us/products/1580486 Housing - HC-B 10-TMS-100/O1STM25G-EEE - 1580486 Accessories Protective covers - HC-B 10-TMS-SD-IP50 - 1690749 HEAVYCON ADVANCE IP50 protective cover B10, for panel mounting side, with clip locking, with retaining cord, diameter of retaining cord eyelet 3 mm     Protective covers - HC-B 10-TMS-SD-IP65 - 1690781 HEAVYCON ADVANCE IP65 protective cover B10, for panel mounting side, with screw locking, with retaining cord, diameter of retaining cord eyelet 3 mm     Screwdriver tools Screwdriver - SF-BIT-HEXB 5-89 - 1208911 Screw bit, hexagonal with ball head, E6.3-1/4" drive, size: Hex 5 x 89 mm, hardened, suitable for holder according to DIN 3126-F 6.3/ISO 1173     Screwdriver - SF-M BH - 1212070 Bit screwdriver, with 1/4" quick-action chuck, handle length 119 mm, 2-component handle, with non-slip grip, suitable for bits according to DIN 3126-C 6.3 and E 6.3/ISO 1173, magnetic     Drawings 21.11.2013   Page 5 / 6 https://www.phoenixcontact.com/us/products/1580486 Housing - HC-B 10-TMS-100/O1STM25G-EEE - 1580486 Dimensioned drawing Diagram 83 Shield attenuation [dB] 65 80 70 35 32 60 50 Ø4,51) Ø3,62) 40 30 20 10 Panel cutout 2) When self-tapping screws are used (Torx® 20, M4) 0 30M 40M 50M 70M 100M 200M 300M 400M Frequency [Hz] 600M 1G Shield attenuation Dimensioned drawing 57 100 105 Dimensional drawing © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 21.11.2013   Page 6 / 6