1584062

https://www.phoenixcontact.com/us/products/1584062 Contact insert - HC-DD42-I-CT-F - 1584062 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON female insert, DD42 series, 42-pos., crimp connection Product Features ■ Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 60.82 g Custom tariff number 85366990 Country of origin China Technical data General Note For HEAVYCON ADVANCE and HEAVYCON housing of B10 type, crimp contacts CK 1,6-ED (crimp contacts not included in the scope of supply). Plug-in connections may only be operated only when there is no load/ voltage. Connection method Crimp connection Degree of pollution 3 Overvoltage category III Constructional and testing regulations DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60664-1, DIN IEC 60512 IEC 60352 Number of positions 42+PE Insertion/withdrawal cycles ≥ 500 03/28/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1584062 Contact insert - HC-DD42-I-CT-F - 1584062 Technical data General Size B10 Connection in acc. with standard IEC / EN Conductor cross section 0.14 mm² ... 2.5 mm² Connection cross section AWG 26 ... 14 Stripping length of the individual wire 8 mm (0.14 - 1.5 mm²) 6 mm (2.5 mm²) Assembly instructions -Housing heights with h >= 72 mm are recommended in the case of a large number of wires. -Use of HC-CST (1676857) coding pins and HC-CBU (1676860) coding sockets has been prescribed. Connection Connectors may be plugged in only when there is no load/voltage. Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts) Material data Flammability rating according to UL 94 V0 Contact material Copper alloy Contact surface material Ag (alternatively Au) Contact carrier material PC Standards/regulations PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) Electrical characteristics Rated voltage (III/3) 250 V Rated surge voltage 4 kV Rated current 10 A Standards and Regulations Connection in acc. with standard IEC / EN CSA Constructional and testing regulations DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60664-1, DIN IEC 60512 IEC 60352 Flammability rating according to UL 94 V0 03/28/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1584062 Contact insert - HC-DD42-I-CT-F - 1584062 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440205 eCl@ss 9.0 27440205 ETIM ETIM 3.0 EC000438 ETIM 4.0 EC000437 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / GL / cULus Recognized Ex Approvals Approvals submitted Approval details 03/28/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1584062 Contact insert - HC-DD42-I-CT-F - 1584062 Approvals CSA      mm²/AWG/kcmil 26-14 Nominal current IN 7A Nominal voltage UN 250 V UL Recognized      mm²/AWG/kcmil 14 Nominal current IN 10 A Nominal voltage UN 250 V cUL Recognized      mm²/AWG/kcmil 14 Nominal current IN 7A Nominal voltage UN 250 V EAC  GL  cULus Recognized  Drawings 03/28/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1584062 Contact insert - HC-DD42-I-CT-F - 1584062 Dimensional drawing 20 18 64 34 16 57 27 14 DD42 12 DD24 DD24 10 8 DD72 4 1 = 1,5 mm2 2 2 = 2,5 mm2 0 0 DD42 DD108 DD108 6 DD72 2 1 20 40 60 80 100 120 0 34,5 Operating current [A] Diagram 20 40 60 80 100 120 Ambient temperature [°C] Female insert Derating diagram Dimensional drawing Schematic diagram 59 20 Ø3,4 1 36 7 42 35 27 49 57 Connector pin assignment, connection side Mounting cutout when used without housing Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/28/2016   Page 5 / 5