1584114

https://www.phoenixcontact.com/us/products/1584114 Contact insert - HC-DD108-I-CT-M - 1584114 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON male insert, DD108 series, 108-pos., crimp connection Product Features ■ Can be used in rail vehicles, satisfy DIN EN 45545-2 with requirement sets R22, R23, and R24 in hazard levels HL1, HL2, and HL3. Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 82.6 g Custom tariff number 85366990 Country of origin China Technical data General Note For HEAVYCON ADVANCE and HEAVYCON housing of B24 type, crimp contacts CK 1,6-ED (crimp contacts not included in the scope of supply). Plug-in connections may only be operated only when there is no load/ voltage. Connection method Crimp connection Degree of pollution 3 Overvoltage category III Constructional and testing regulations DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60664-1, DIN IEC 60512 IEC 60352 Number of positions 108+PE Insertion/withdrawal cycles ≥ 500 04/13/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1584114 Contact insert - HC-DD108-I-CT-M - 1584114 Technical data General Size B24 Connection in acc. with standard IEC / EN Conductor cross section 0.14 mm² ... 2.5 mm² Connection cross section AWG 26 ... 14 Stripping length of the individual wire 8 mm (0.14 - 1.5 mm²) 6 mm (2.5 mm²) Assembly instructions -Housing heights with h >= 72 mm are recommended in the case of a large number of wires. -Use of HC-CST (1676857) coding pins and HC-CBU (1676860) coding sockets has been prescribed. Connection Connectors may be plugged in only when there is no load/voltage. Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts) Material data Flammability rating according to UL 94 V0 Contact material Copper alloy Contact surface material Ag (alternatively Au) Contact carrier material PC Standards/regulations PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) Electrical characteristics Rated voltage (III/3) 250 V Rated surge voltage 4 kV Rated current 10 A Standards and Regulations Connection in acc. with standard IEC / EN CSA Constructional and testing regulations DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60664-1, DIN IEC 60512 IEC 60352 Flammability rating according to UL 94 V0 04/13/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1584114 Contact insert - HC-DD108-I-CT-M - 1584114 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440205 eCl@ss 9.0 27440205 ETIM ETIM 3.0 EC000438 ETIM 4.0 EC000437 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / EAC / GL / cULus Recognized Ex Approvals Approvals submitted Approval details 04/13/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1584114 Contact insert - HC-DD108-I-CT-M - 1584114 Approvals CSA      mm²/AWG/kcmil 26-14 Nominal current IN 7A Nominal voltage UN 250 V UL Recognized      mm²/AWG/kcmil 14 Nominal current IN 10 A Nominal voltage UN 250 V cUL Recognized      mm²/AWG/kcmil 14 Nominal current IN 7A Nominal voltage UN 250 V EAC  EAC  GL  cULus Recognized  Drawings 04/13/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1584114 Contact insert - HC-DD108-I-CT-M - 1584114 91 Diagram Operating current [A] Schematic diagram 1 20 18 16 14 DD42 12 0 18 0 DD42 DD108 DD108 6 DD72 4 1 = 1,5 mm2 2 2 = 2,5 mm2 108 DD24 DD24 10 8 DD72 2 1 20 40 60 80 100 120 0 20 40 60 80 100 120 Ambient temperature [°C] Connector pin assignment, connection side Derating diagram Dimensional drawing Dimensional drawing 108 98 20 27 Ø3,4 35 104 27 34 32,5 111 104 Male insert Mounting cutout when used without housing Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/13/2016   Page 5 / 5