1584376

https://www.phoenixcontact.com/us/products/1584376 Male insert - HC-D 15-I-CT-M - 1584376 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) HEAVYCON male insert, D15 series, 15-pos., crimp connection Key commercial data Packing unit 1 PCE Weight per Piece (excluding packing) 38.0 GRM Custom tariff number 85366990 Country of origin China Technical data General Note For HC-D15 housing, crimp contacts CK1,6-ED (crimp contacts not included in scope of supply) Connection method Crimp connection Pollution degree 3 Surge voltage category III Constructional and testing regulations DIN VDE 0627/86 DIN VDE 0110/02.79 DIN VDE 0110-1/04.97 IEC 60664-1, DIN IEC 60512 IEC 60352 Number of positions 15+PE Insertion/withdrawal cycles ≥ 500 Design D15 Connection in acc. with standard IEC / EN Conductor cross section 0.14 mm² ... 2.5 mm² Connection cross section AWG 26 ... 14 21.11.2013   Page 1 / 7 https://www.phoenixcontact.com/us/products/1584376 Male insert - HC-D 15-I-CT-M - 1584376 Technical data General Stripping length of the individual wire 8 mm 6 mm (2.5 mm²) Assembly instructions - Use of HC-CST (1676857) coding pins and HC-CBU (1676860) coding sockets has been prescribed. Connection Connectors may be plugged in only when there is no load/voltage. Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts) Material data Inflammability class according to UL 94 V0 Contact material Copper alloy Contact surface material Ag (alternatively Au) Contact carrier material PA Electrical characteristics Rated voltage (III/3) 250 V Rated surge voltage 4 kV Rated current 10 A Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27261205 eCl@ss 7.0 27440207 eCl@ss 8.0 27440207 ETIM ETIM 2.0 EC000438 ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 21.11.2013   Page 2 / 7 https://www.phoenixcontact.com/us/products/1584376 Male insert - HC-D 15-I-CT-M - 1584376 Classifications UNSPSC UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Accessories Accessories Assembly tool Removal tool - VC-EW 1,6 - 1884869 Contact removal tool, for turned and rolled CK- 1.6-... contacts     Coding element Coding element - HC-CST - 1676857 Coding peg for coding up to 16 connectors     Coding element - HC-CBU - 1676860 Coding socket for coding up to 16 connectors     Coding bolt - HC-CB - 1772722 Coding pin, prevents mismating of up to six connectors with an identical number of positions     21.11.2013   Page 3 / 7 https://www.phoenixcontact.com/us/products/1584376 Male insert - HC-D 15-I-CT-M - 1584376 Accessories Crimp contact Crimp contact - CK1,6-ED-0,37ST AG - 1663336 Turned 1.6 crimp contact, individual male contact, core diameter 0.14 to 0.37 mm², silver-plated     Crimp contact - CK1,6-ED-0,50ST AG - 1663349 Turned 1.6 crimp contact, individual male contact, core diameter 0.5 mm², silver-plated     Crimp contact - CK1,6-ED-0,75ST AG - 1663352 Turned 1.6 crimp contact, individual male contact, core diameter 0.75 mm², silver-plated     Crimp contact - CK1,6-ED-1,00ST AG - 1663365 Turned 1.6 crimp contact, individual male contact, core diameter 0.75 to 1.00 mm², silver-plated     Crimp contact - CK1,6-ED-1,50ST AG - 1663378 Turned 1.6 crimp contact, individual male contact, core diameter 1.5 mm², silver-plated     21.11.2013   Page 4 / 7 https://www.phoenixcontact.com/us/products/1584376 Male insert - HC-D 15-I-CT-M - 1584376 Accessories Crimp contact - CK1,6-ED-2,50ST AG - 1663381 Turned 1.6 crimp contact, individual male contact, core diameter 2.5 mm², silver-plated     Crimp contact - CK1,6-ED-0,37ST AU - 1674901 Turned 1.6 crimp contact, individual male contact, core diameter 0.14 to 0.37 mm², gold-plated     Crimp contact - CK1,6-ED-0,50ST AU - 1672453 Turned 1.6 crimp contact, individual male contact, core diameter 0.5 mm², gold-plated     Crimp contact - CK1,6-ED-0,75ST AU - 1674914 Turned 1.6 crimp contact, individual male contact, core diameter 0.75 mm², gold-plated     Crimp contact - CK1,6-ED-1,00ST AU - 1674888 Turned 1.6 crimp contact, individual male contact, core diameter 0.75 to 1.00 mm², gold-plated     21.11.2013   Page 5 / 7 https://www.phoenixcontact.com/us/products/1584376 Male insert - HC-D 15-I-CT-M - 1584376 Accessories Crimp contact - CK1,6-ED-1,50ST AU - 1674875 Turned 1.6 crimp contact, individual male contact, core diameter 1.5 mm², gold-plated     Crimp contact - CK1,6-ED-2,50ST AU - 1674927 Turned 1.6 crimp contact, individual male contact, core diameter 2.5 mm², gold-plated     Crimping tool Crimping pliers - CRIMPFOX-1,6/2,5-ED-4,0 - 1687419 Crimping pliers, for turned contacts, CK 1.6 ED... and CK 2.5 ED...     Mounting material Screw - HC-A-PES - 1584868 PE screw for contact inserts of A series     Plug assembly frame 21.11.2013   Page 6 / 7 https://www.phoenixcontact.com/us/products/1584376 Male insert - HC-D 15-I-CT-M - 1584376 Accessories Connector assembly frame - HC-SMR-D15 - 1604010 HEAVYCON connector assembly frame, for contact inserts of type D15     Drawings C B A 1 2 3 4 5 Diagram A B C 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 Connector pin assignment, connection side: left pin, right socket Current carrying capacity [A] Schematic diagram 20 16 12 2 3 8 1 1 = 0,75 mm² 2 = 1,0 mm² 3 = 1,5 mm² 4 0 0 20 40 60 80 100 120 Ambient temperature [°C] Derating diagram: HC-D...C series Dimensioned drawing Dimensioned drawing 55,5 16 43,5 Male insert Ø3,4 24 16 10 22,5 49,5 34,2 55,4 49,5 Panel cutout © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 21.11.2013   Page 7 / 7