https://www.phoenixcontact.com/us/products/1584415
Contact insert - HC-D 40-I-CT-M - 1584415
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
HEAVYCON male insert, D40 series, 40-pos., crimp connection. PE connection using tension sleeve technology.
Key commercial data
Packing unit
1 pc
Weight per Piece (excluding packing)
68.0 GRM
Custom tariff number
85366990
Country of origin
China
Technical data
General
Note
For HC-D40 housing, crimp contacts CK1,6-ED (crimp contacts not
included in scope of supply)
Connection method
Crimp connection
Pollution degree
3
Surge voltage category
III
Constructional and testing regulations
DIN VDE 0627/86
DIN VDE 0110/02.79
DIN VDE 0110-1/04.97
IEC 60664-1, DIN IEC 60512
IEC 60352
Number of positions
40+PE
Insertion/withdrawal cycles
≥ 500
Type
B16
Connection in acc. with standard
IEC / EN
Conductor cross section
0.14 mm² ... 2.5 mm²
Connection cross section AWG
26 ... 14
03/21/2014 Page 1 / 9
https://www.phoenixcontact.com/us/products/1584415
Contact insert - HC-D 40-I-CT-M - 1584415
Technical data
General
Stripping length of the individual wire
8 mm
6 mm (2.5 mm²)
Assembly instructions
- Use of HC-CST (1676857) coding pins and HC-CBU (1676860) coding
sockets has been prescribed.
Connection
Connectors may be plugged in only when there is no load/voltage.
Ambient conditions
Ambient temperature (operation)
-40 °C ... 125 °C (including heating up of contacts)
Material data
Inflammability class according to UL 94
V0
Contact material
Copper alloy
Contact surface material
Ag (alternatively Au)
Contact carrier material
PA
Electrical characteristics
Rated voltage (III/3)
250 V
Rated surge voltage
4 kV
Rated current
10 A
Classifications
eCl@ss
eCl@ss 4.0
27140816
eCl@ss 4.1
27140816
eCl@ss 5.0
27143424
eCl@ss 5.1
27143424
eCl@ss 6.0
27261205
eCl@ss 7.0
27440207
eCl@ss 8.0
27440207
ETIM
ETIM 2.0
EC000438
ETIM 3.0
EC000438
ETIM 4.0
EC000438
ETIM 5.0
EC000438
UNSPSC
UNSPSC 6.01
30211923
UNSPSC 7.0901
39121522
03/21/2014 Page 2 / 9
https://www.phoenixcontact.com/us/products/1584415
Contact insert - HC-D 40-I-CT-M - 1584415
Classifications
UNSPSC
UNSPSC 11
39121522
UNSPSC 12.01
39121522
UNSPSC 13.2
39121522
Accessories
Accessories
Adapter plate
Adapter plate - HC-B 24-ADP-B 16-GY - 1660449
HEAVYCON adapter plate, type B24 on B16, for panel cutouts of type B24, gray
Assembly tool
Removal tool - VC-EW 1,6 - 1884869
Contact removal tool, for turned and rolled CK- 1.6-... contacts
Coding element
Coding element - HC-CBU - 1676860
Coding socket for coding up to 16 connectors
03/21/2014 Page 3 / 9
https://www.phoenixcontact.com/us/products/1584415
Contact insert - HC-D 40-I-CT-M - 1584415
Accessories
Coding bolt - HC-CB - 1772722
Coding pin, prevents mismating of up to six connectors with an identical number of positions
Coding element - HC-CST - 1676857
Coding peg for coding up to 16 connectors
Crimp contact
Crimp contact - CK1,6-ED-0,37ST AG - 1663336
Turned 1.6 crimp contact, individual male contact, core diameter 0.14 to 0.37 mm², silver-plated
Crimp contact - CK1,6-ED-0,50ST AG - 1663349
Turned 1.6 crimp contact, individual male contact, core diameter 0.5 mm², silver-plated
Crimp contact - CK1,6-ED-0,75ST AG - 1663352
Turned 1.6 crimp contact, individual male contact, core diameter 0.75 mm², silver-plated
03/21/2014 Page 4 / 9
https://www.phoenixcontact.com/us/products/1584415
Contact insert - HC-D 40-I-CT-M - 1584415
Accessories
Crimp contact - CK1,6-ED-1,00ST AG - 1663365
Turned 1.6 crimp contact, individual male contact, core diameter 0.75 to 1.00 mm², silver-plated
Crimp contact - CK1,6-ED-1,50ST AG - 1663378
Turned 1.6 crimp contact, individual male contact, core diameter 1.5 mm², silver-plated
Crimp contact - CK1,6-ED-2,50ST AG - 1663381
Turned 1.6 crimp contact, individual male contact, core diameter 2.5 mm², silver-plated
Crimp contact - CK1,6-ED-0,37ST AU - 1674901
Turned 1.6 crimp contact, individual male contact, core diameter 0.14 to 0.37 mm², gold-plated
Crimp contact - CK1,6-ED-0,50ST AU - 1672453
Turned 1.6 crimp contact, individual male contact, core diameter 0.5 mm², gold-plated
03/21/2014 Page 5 / 9
https://www.phoenixcontact.com/us/products/1584415
Contact insert - HC-D 40-I-CT-M - 1584415
Accessories
Crimp contact - CK1,6-ED-0,75ST AU - 1674914
Turned 1.6 crimp contact, individual male contact, core diameter 0.75 mm², gold-plated
Crimp contact - CK1,6-ED-1,00ST AU - 1674888
Turned 1.6 crimp contact, individual male contact, core diameter 0.75 to 1.00 mm², gold-plated
Crimp contact - CK1,6-ED-1,50ST AU - 1674875
Turned 1.6 crimp contact, individual male contact, core diameter 1.5 mm², gold-plated
Crimp contact - CK1,6-ED-2,50ST AU - 1674927
Turned 1.6 crimp contact, individual male contact, core diameter 2.5 mm², gold-plated
Crimping tool
Crimping pliers - CRIMPFOX-1,6/2,5-ED-4,0 - 1687419
Crimping pliers, for turned contacts, CK 1.6 ED... and CK 2.5 ED...
03/21/2014 Page 6 / 9
https://www.phoenixcontact.com/us/products/1584415
Contact insert - HC-D 40-I-CT-M - 1584415
Accessories
Docking frame
Docking frames - HC-B 16-ANDOCK - 1586138
Docking frame for racks, for contact inserts of B16 type, with four M5 flat headed screws, rack balance x/y axis +- 1.5 mm
Mounting material
Screw - HC-B-PES - 1604997
PE screw, for contact inserts HC-B / HC-BB / HC-DD / HC-D40 / HC-D64
PE multiplier - HC-B-3PE - 1644326
PE multiplier, for three PE connections, for HC-B (besides HC-B..E..ZZ) / HC-BB / HC-DD / HC-D40 / HC-D64 contact
inserts
Strain relief clamp - HC-B-ZG - 1685327
Strain relief clamps contact inserts of series: B-, BB-, D 40, D 64, DD and HV, straight cable exit
Strain relief clamp - HC-B-ZS - 1685330
Strain relief clamps contact inserts of series: B-, BB-, D 40, D 64, DD and HV, lateral cable exit
03/21/2014 Page 7 / 9
https://www.phoenixcontact.com/us/products/1584415
Contact insert - HC-D 40-I-CT-M - 1584415
Accessories
Plug assembly frame
Connector assembly frame - HC-SMR-B16 - 1687972
HEAVYCON connector assembly frame, for contact inserts of type B16
Plug mounting plate
Connector assembly frame - HC-SMP 125-B16-AMQ - 1660973
HEAVYCON connector assembly frame with panel mounting base with double locking latch, for contact inserts of type
B16
Drawings
D C B A
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
A B C D
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
Diagram
Current carrying capacity [A]
Schematic diagram
14
2
12
10
3
8
6
4
1 = 0,75 mm²
2 = 1,0 mm²
3 = 1,5 mm²
2
0
0
20
1
40
60
80
100
120
Ambient temperature [°C]
Connector pin assignment connection side: Left pin; right socket
Derating diagram: HC-D...C series
03/21/2014 Page 8 / 9
https://www.phoenixcontact.com/us/products/1584415
Contact insert - HC-D 40-I-CT-M - 1584415
Dimensioned drawing
Dimensioned drawing
27
80
20
27
72
35
34
77,5
32,8
83,5
Ø3,4
Male insert
77,5
Mounting cutout when used without housing
Phoenix Contact 2014 © - all rights reserved
http://www.phoenixcontact.com
03/21/2014 Page 9 / 9
