1585715

https://www.phoenixcontact.com/us/products/1585715 Contact insert module - HC-M-02-HS-70/16-MOD-BU - 1585715 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON contact insert module, socket, 2-pos. to 70 A, 16 mm² axial screw connection Key Commercial Data Packing unit 1 pc Minimum order quantity 2 pc Weight per Piece (excluding packing) 32.12 g Custom tariff number 85366990 Country of origin Germany Technical data Electrical characteristics Note For HEAVYCON HC-B6 to B48 housing, HC-M-MHR... hinged retaining frame required, axial connection for 2.5 mm Allen key Rated voltage (III/3) 1000 V Rated current 70 A Rated surge voltage 8 kV Number of positions 2 Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C Mechanical characteristics Conductor cross section 6 mm² ... 16 mm² Connection cross section AWG 8 ... 6 Stripping length of the individual wire 11 mm +1 Tightening torque 2 Nm (6 mm²) 3 Nm (10 mm²) 03/28/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1585715 Contact insert module - HC-M-02-HS-70/16-MOD-BU - 1585715 Technical data Mechanical characteristics 4 Nm (16 mm²) Wire diameter including insulation 8.9 mm Hexagonal socket SW2,5 Insertion/withdrawal cycles ≥ 500 Minimum housing height 72 mm General Series HC-M-HS Number of module slots 1 Connection method Axial screw connection Flammability rating according to UL 94 V0 Degree of pollution 3 Overvoltage category III Assembly instructions Use 2.5 mm Allen wrenches for axial connection. Only for stranded wires. For housing heights h ≥ 52 mm. Plug-in connections may only be operated only when there is no load/voltage. Connection Note regarding axial connection technology: Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used. Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use. The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use. Assembly instructions Before assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque. Material data Contact material Copper alloy Contact surface material Ag Contact carrier material PC Standards and Regulations Connection in acc. with standard UL Flammability rating according to UL 94 V0 03/28/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1585715 Contact insert module - HC-M-02-HS-70/16-MOD-BU - 1585715 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440207 ETIM ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 43172601 UNSPSC 7.0901 39121416 UNSPSC 11 43172601 UNSPSC 12.01 39121408 UNSPSC 13.2 39121408 Approvals Approvals Approvals UL Recognized / EAC / EAC Ex Approvals Approvals submitted Approval details 03/28/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1585715 Contact insert module - HC-M-02-HS-70/16-MOD-BU - 1585715 Approvals UL Recognized      mm²/AWG/kcmil 4 Nominal current IN 70 A Nominal voltage UN 600 V EAC  EAC  Drawings Diagram Operating current [A] Schematic diagram 1 2 100 1 80 60 40 1 = 16 mm 20 2 = 6 mm 2 2 2 0 0 20 40 60 80 100 120 Ambient temperature [°C] Connector pin assignment, connection side Derating diagram (6 modules in HC-B 24 housing) Dimensional drawing 14,6 Schematic diagram 46,5 34,2 1 Axial screw connection 2 Socket module Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/28/2016   Page 4 / 4