1585731

Extract from the online catalog     HC-M-02-HS-70/22-MOD-BU Order No.: 1585731 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1585731   HEAVYCON contact insert module, socket, 2-pos. to 70 A, axial screw connection   Product notes WEEE/RoHS-compliant since: 08/14/2007 Commercial data GTIN (EAN) 4 046356 308236 sales group D042 Pack 2 pcs. Customs tariff 85389099 Catalog page information Page 453 (PC-2009) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data Electrical characteristics Note for housing HC-B6 to B48, for housing HC-ADVANCE-B6 to B24, hinged retaining frame HC-M-MHR... necessary, axial screw connection for 2.5 mm Allen wrench: Rated voltage (III/3) 1000 V Rated current 70 A PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 5 Jan 27, 2011 HC-M-02-HS-70/22-MOD-BU Order No.: 1585731 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1585731 Rated surge voltage 8 kV Ambient temperature (operation) -40 °C ... 125 °C Number of positions 2 Mechanical characteristics Conductor cross-section 14 mm² ... 22 mm² Connection cross-section AWG 4 Stripping length of the individual wire 11 mm + 1 (14 mm ... 16 mm ) 2 2 2 12.5 mm + 1 (for 22 mm ) Tightening torque 2 2 4 Nm (for 14 mm ... 16 mm ) 2 5 Nm (22 mm ) Wire diameter including insulation 10 mm Hexagonal socket SW2,5 Insertion/withdrawal cycles ≥ 500 General characteristics Number of module slots 1 Connection method Axial screw connection Inflammability class acc. to UL 94 V0 Pollution degree 3 Surge voltage category III Assembly instructions Use 2.5 mm Allen wrenches for axial connection. Only for stranded wires. For housing heights h ≥ 52 mm. Plug-in connections may only be operated only when there is no load/ voltage. Connection Note regarding axial connection technology: Only for stranded wires. The conductor cross-sections stated refer to the geometric cross-section of the cable used.Use of cables with a geometric cross-section very different from that of the cable's nominal crosssection should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.Connection Before starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 2 / 5 Jan 27, 2011 HC-M-02-HS-70/22-MOD-BU Order No.: 1585731 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1585731 Material data Contact material Copper alloy Contact surface material Ag Contact carrier material PC Certificates / Approvals Certification UL Diagrams/Drawings Diagram Derating diagram (6 modules in HC-B 24 housing) Dimensioned drawing Socket module PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 3 / 5 Jan 27, 2011 HC-M-02-HS-70/22-MOD-BU Order No.: 1585731 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1585731 Schematic diagram Axial screw connection Connector pin assignment, connection side PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 5 Jan 27, 2011 HC-M-02-HS-70/22-MOD-BU Order No.: 1585731 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1585731 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de © 2010 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 5 / 5 Jan 27, 2011