1586264

https://www.phoenixcontact.com/us/produkte/1586264 Contact insert - HC-HS 2-D7-EBUS - 1586264 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) HEAVYCON female insert, HS2 series, 2+PE-pos., axial screw connection   Key commercial data Packing unit 1 PCE Minimum order quantity 10 PCE GTIN Custom tariff number 85366990 Country of origin GERMANY Technical data General data Note For housing HC-D7 Connection method Axial screw connection Tightening torque 1.8 Nm Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts) Pollution degree 3 Surge voltage category III Constructional and testing regulations DIN VDE 0627/86 Constructional and testing regulations DIN VDE 0110/02.79 Constructional and testing regulations DIN VDE 0110-1/04.97 Constructional and testing regulations IEC 60664-1, DIN IEC 60512 Constructional and testing regulations IEC 60352 Number of positions 2+PE Insertion/withdrawal cycles ≥ 500 19.04.2013   Page 1 / 5 https://www.phoenixcontact.com/us/produkte/1586264 Contact insert - HC-HS 2-D7-EBUS - 1586264 Technical data General data Design D7 Conductor cross section 4 mm² ... 10 mm² Connection cross section AWG 10 ... 8 Stripping length of the individual wire 8 mm +1 Assembly instructions -The axial screw connection must be established using a 2 mm Allen wrench. -Use only stranded wires for axial screw connection. -Plug-in connections may only be operated only when there is no load/ voltage. Connection Note regarding axial connection technology: Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used. Use of cables with a geometric cross section very different from the cable's nominal cross section should be checked before use. The wiring space of the axial screw method is established for fine strand cables in accordance with VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) should be checked before use. Assembly instructions Before assembly, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The wires should be inserted as far as they will go into the contact chamber (until the insulation touches the contact). Hold the wires in position and use the socket wrench to tighten. The used wire end should be cut off before connecting again. The connection screw may only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable should be mechanically intercepted at an appropriate distance from the connection point (e.g., by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. When not using PE contacts: set the PE contact as far as possible in a clockwise direction. Material data Inflammability class according to UL 94 V0 Contact material Copper alloy Contact surface material Ag Contact carrier material PC Electrical characteristics Rated voltage (III/3) 400 V Rated surge voltage 6 kV Rated current 40 A Classifications ETIM ETIM 3.0 EC000438 19.04.2013   Page 2 / 5 https://www.phoenixcontact.com/us/produkte/1586264 Contact insert - HC-HS 2-D7-EBUS - 1586264 Classifications ETIM ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 Approvals Approvals Approvals UL Recognized / cUL Recognized / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized      Nominal current IN 28 A 19.04.2013   Page 3 / 5 https://www.phoenixcontact.com/us/produkte/1586264 Contact insert - HC-HS 2-D7-EBUS - 1586264 Approvals     Nominal voltage UN 600 V cUL Recognized      Nominal current IN 28 A Nominal voltage UN 600 V GOST  cULus Recognized  Drawings 1 2 Diagram Operating current [A] Schematic diagram 100 80 2 60 40 1 20 1 = 6 mm2 2 = 10 mm² 0 20 40 60 80 100 120 Ambient temperature [°C] Derating diagram: Series HC-HS2-D7-E...S 19.04.2013   Page 4 / 5 https://www.phoenixcontact.com/us/produkte/1586264 Contact insert - HC-HS 2-D7-EBUS - 1586264 Dimensioned drawing 34,8 21 21 Schematic diagram Axial connection Female insert © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 19.04.2013   Page 5 / 5