1604120

https://www.phoenixcontact.com/us/products/1604120 EMC housing - HC-B 6-TMS-100/O1STM25S-EMV - 1604120 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) HEAVYCON ADVANCE EMV sleeve housing B6, with screw locking, height 100 mm, with 1xM25 thread, lateral cable outlet Key commercial data Packing unit 1 PCE Weight per Piece (excluding packing) 296.03 GRM Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Height 100 mm Width 57 mm Length 92 mm Length of the assembly cutout 52 mm Width of the assembly cutout 35 mm Ambient conditions Degree of protection of housing (IP) IP65 IP68 (0.2 bar/24 h) IP69K Ambient temperature (operation) -40 °C ... 125 °C General Note For contact inserts HC-B6, BB10, DD24, M Design B6 Housing type Sleeve housings Locking type Screw locking 12/5/13   Page 1 / 4 https://www.phoenixcontact.com/us/products/1604120 EMC housing - HC-B 6-TMS-100/O1STM25S-EMV - 1604120 Technical data General Torque 3 Nm (Locking screw) Fixing screws M6 Cable exit Lateral Type of the screw connection 1x M25 Housing material Aluminum die-cast Housing surface material EMC coating, silver Seal material NBR, conductive Material lock High-grade steel Assembly instructions In order to guarantee that the ground conductor contact functions even when plugged in at an angle, the two panel mounting flanges must have sufficient electrical contact with the metal mounting panel. Connection To ensure optimum shielding, any insulating power coating must be removed from the profile gasket area on the control cabinet panel. Tightening torque of locking screw: 3 Nm. Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27140816 eCl@ss 5.0 27371205 eCl@ss 5.1 27371205 eCl@ss 6.0 27371205 eCl@ss 7.0 27371205 eCl@ss 8.0 27371205 ETIM ETIM 2.0 EC000437 ETIM 3.0 EC000437 ETIM 4.0 EC000437 ETIM 5.0 EC000437 UNSPSC UNSPSC 6.01 31261502 UNSPSC 7.0901 31261502 UNSPSC 11 31261502 UNSPSC 12.01 31261502 UNSPSC 13.2 31261502 12/5/13   Page 2 / 4 https://www.phoenixcontact.com/us/products/1604120 EMC housing - HC-B 6-TMS-100/O1STM25S-EMV - 1604120 Approvals Approvals Approvals GOST Ex Approvals Approvals submitted Approval details GOST  Accessories Accessories Panel mounting flange Mounting flange - HC-B-AF - 1686533 Panel mounting flange for HEAVYCON-ADVANCE TMS housing with screw locking     Mounting flange - HC-B-AF-SET - 1604638 Panel mounting flange for screw locking, set comprising 2 panel mounting flanges with 4 self-tapping Torx® head screws and 4 fan-type washers     Protective cover 12/5/13   Page 3 / 4 https://www.phoenixcontact.com/us/products/1604120 EMC housing - HC-B 6-TMS-100/O1STM25S-EMV - 1604120 Accessories Protective covers - HC-B 6-TMS-SD-IP50 - 1690736 HEAVYCON ADVANCE IP50 protective cover B6, for panel mounting side, with clip locking, with retaining cord, diameter of retaining cord eyelet 3 mm     Protective covers - HC-B 6-TMS-SD-IP65 - 1690778 HEAVYCON ADVANCE IP65 protective cover B6, for panel mounting side, with screw locking, with retaining cord, diameter of retaining cord eyelet 3 mm     Drawings Dimensioned drawing 92 Dimensioned drawing 70 57 35 32 100 52 Ø4,51) Ø3,62) Mounting cutout when M4 screws are used 2) when self-tapping Torx® screws are used (Torx® 20, M4) 1) © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 12/5/13   Page 4 / 4