1613762

https://www.phoenixcontact.com/us/products/1613762 Device connector, front mounting - RF-16P1N8AAD00 - 1613762 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Device connector, front mounting, angled rotatable, Screw locking, M23, Number of positions: 16, Type of contact: Male connector, Crimp connection, Axial O-ring, 4xØ3,2, Shielded: Yes, Flange dimensions: 26 mm x 26 mm The figure shows the 12-pos. product version   Key commercial data Packing unit 11 Weight per Piece (excluding packing) 117.01 GRM Custom tariff number 85366990 Country of origin Germany Technical data General Note Order information Order crimp contacts Ø 1 mm separately Type of locking Screw locking Direction of rotation of contact chamber numbering Standard Coding N Contact connection method Crimp connection Type of contacts Male connector Number of positions 16 Contact diameter of power contacts 1 mm Nominal current per power contact at 25°C 8A Mounting type 4xØ3,2 Ambient conditions Ambient temperature -20 °C ... 125 °C Degree of protection IP67 Material 01.11.2013   Page 1 / 3 https://www.phoenixcontact.com/us/products/1613762 Device connector, front mounting - RF-16P1N8AAD00 - 1613762 Technical data Material Housing material Turned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD-Zn) Insulator material PA 66 Gasket and O-ring material FPM Specifications according to DIN EN 61984:2001 Installation height max. 2000 m Nominal / operating voltage of power contacts 100 V Rated surge voltage of power contacts 1.5 kV Surge voltage category of power contacts III Pollution degree of power contacts 3 Surge voltage category of signal contacts III Pollution degree of signal contacts 3 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27260701 eCl@ss 5.1 27260701 eCl@ss 6.0 27260708 eCl@ss 7.0 27440312 eCl@ss 8.0 27440312 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC001121 ETIM 5.0 EC002635 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Drawings 01.11.2013   Page 2 / 3 https://www.phoenixcontact.com/us/products/1613762 Device connector, front mounting - RF-16P1N8AAD00 - 1613762 Schematic diagram Dimensioned drawing M23x1 1 11 12 2 10 16 13 3 14 4 9 15 R 8 5 7 6 ° 98° 212 4,65 Ø 4x 3, 2 37 50,95 1,85 25,4 39,4 19,8 28 Dimensioned drawing 4xM3 19,8±0,1 Edge abrasion max. 0.2 Ø20+0,1 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 01.11.2013   Page 3 / 3