1618648

1618648

  • 厂商:

    PHOENIX(菲尼克斯)

  • 封装:

    -

  • 描述:

    1618648

  • 数据手册
  • 价格&库存
1618648 数据手册
https://www.phoenixcontact.com/us/products/1618648 Cable connector - ST-08P1N8A8K03S - 1618648 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Cable connector, straight, SPEEDCON locking, M17, number of positions: 8, type of contact: Pin, shielded: yes, cable diameter range: 5 mm ... 9.2 mm, number of positions: 8, connection method: Crimp connection Your advantages  Reduced size: ideal for compact devices  Consistent EMC protection for reliable connection solutions in the industrial environment  Crimping connection: vibration- and temperature-resistant assembly  Flexible use: reliably connect various cable diameters Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356792424 Weight per Piece (excluding packing) 40.000 g Custom tariff number 85366990 Country of origin Germany Technical data General Note Order information: Order crimp contacts Ø 1 mm separately Type of locking SPEEDCON locking Direction of rotation of contact chamber numbering Standard Coding N Contact connection method Crimp connection Type of contacts Pin 09/12/2020   Page 1 / 8 https://www.phoenixcontact.com/us/products/1618648 Cable connector - ST-08P1N8A8K03S - 1618648 Technical data General Number of positions 8 Contact diameter of power contacts 1 mm Rated current for power contacts 8A Conductor entry 5 mm ... 9.2 mm Pg housing screw connection none Ambient conditions Ambient temperature -40 °C ... 125 °C Degree of protection IP67 Specifications according to DIN EN 61984:2001 Installation height max. 3000 m Nominal / operating voltage of power contacts 60 V Rated surge voltage of power contacts 1.5 kV Overvoltage category of power contacts III Degree of pollution of power contacts 3 Standards and Regulations Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. • The products are suitable for applications in plant, controller, and electrical device engineering. • When operating the connectors in outdoor applications, they must be separately protected against environmental influences. • Assembled products may not be manipulated or improperly opened. • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). • When using the product in direct connection with third-party manufacturers, the user is responsible. • For operating voltages > 50 V AC, conductive connector housings must be grounded • Ensure that the protective or functional ground has been properly connected. 09/12/2020   Page 2 / 8 https://www.phoenixcontact.com/us/products/1618648 Cable connector - ST-08P1N8A8K03S - 1618648 Technical data Standards and Regulations • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector • Only use tools recommended by Phoenix Contact • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. • Operate the connector only when it is fully plugged in and interlocked. • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. • Observe the minimum bending radius of the cable. Lay the cable without twisting it. • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/12/2020   Page 3 / 8 https://www.phoenixcontact.com/us/products/1618648 Cable connector - ST-08P1N8A8K03S - 1618648 Diagram I = current strength, ϑ = ambient temperature, 8x 8 A Dimensional drawing 09/12/2020   Page 4 / 8 https://www.phoenixcontact.com/us/products/1618648 Cable connector - ST-08P1N8A8K03S - 1618648 Schematic diagram Connector pin assignment Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 eCl@ss 7.0 27440102 09/12/2020   Page 5 / 8 https://www.phoenixcontact.com/us/products/1618648 Cable connector - ST-08P1N8A8K03S - 1618648 Classifications eCl@ss eCl@ss 8.0 27440102 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC001121 ETIM 5.0 EC002635 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 60 V Nominal current IN 5A  FILE E 335019 09/12/2020   Page 6 / 8 https://www.phoenixcontact.com/us/products/1618648 Cable connector - ST-08P1N8A8K03S - 1618648 Approvals cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 60 V Nominal current IN 5A  FILE E 335019 EAC      B.01687 cULus Recognized       Accessories Accessories Crimp contact Crimp contact - ST-10KP010 - 1618255 Crimp contact, turned, Single contact, contact diameter: 1 mm, crimp range: 0.06 mm² ... 0.25 mm²     Crimp contact - ST-10KP035 - 1618458 Crimp contact, turned, contact diameter: 1 mm, crimp range: 0.25 mm² ... 1 mm²     Mounting material 09/12/2020   Page 7 / 8 https://www.phoenixcontact.com/us/products/1618648 Cable connector - ST-08P1N8A8K03S - 1618648 Accessories Color-coding - ST-Z0016 - 1617993 Color-coding, color: green     Color-coding - ST-Z0017 - 1618049 Color-coding, color: orange     Color-coding - ST-Z0018 - 1618050 Color-coding, color: black     Protective cover Protective cap - ST-Z0024 - 1621904 Plastic protection cap for connectors with M17 compact knurled nut and M17 compact SPEEDCON knurled nut     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 09/12/2020   Page 8 / 8
1618648 价格&库存

很抱歉,暂时无法提供与“1618648”相匹配的价格&库存,您可以联系我们找货

免费人工找货
1618648
  •  国内价格 香港价格
  • 1+321.055601+41.47788

库存:3