1619327

https://www.phoenixcontact.com/us/products/1619327 Connector in molded plastic on both sides - K-3E-M17 M9/5,0-B01/M17 F8 - 1619327 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector in molded plastic on both sides, length: 5 m, color of outer sheath: orange RAL 2003 Your advantages  Our standard: robust halogen-free PUR cable  Simple and safe: 100% electrically tested and assembled ready for use  Designs with pre-assembled cables on one or both sides  High flexibility: customer-specific assemblies and cable lengths can be supplied Key Commercial Data Packing unit 1 pc Minimum order quantity 2 pc GTIN GTIN 4046356830669 Custom tariff number 85444290 Country of origin Germany Technical data Conductor length 5m Standards and Regulations Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. 04/20/2021   Page 1 / 7 https://www.phoenixcontact.com/us/products/1619327 Connector in molded plastic on both sides - K-3E-M17 M9/5,0-B01/M17 F8 - 1619327 Technical data Standards and Regulations • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. • The products are suitable for applications in plant, controller, and electrical device engineering. • When operating the connectors in outdoor applications, they must be separately protected against environmental influences. • Assembled products may not be manipulated or improperly opened. • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). • When using the product in direct connection with third-party manufacturers, the user is responsible. • For operating voltages > 50 V AC, conductive connector housings must be grounded • Ensure that the protective or functional ground has been properly connected. • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector • Only use tools recommended by Phoenix Contact • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. • Operate the connector only when it is fully plugged in and interlocked. • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. • Observe the minimum bending radius of the cable. Lay the cable without twisting it. • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Connector specifications Type straight plastic-sheathed Housing material Zinc die-cast Thread type M17 Locking type Screw locking Degree of protection IP67, when in locked state 04/20/2021   Page 2 / 7 https://www.phoenixcontact.com/us/products/1619327 Connector in molded plastic on both sides - K-3E-M17 M9/5,0-B01/M17 F8 - 1619327 Technical data Connector specifications Number of positions 3+PE Direction of rotation Standard Type of contact Socket Insertion/withdrawal cycles 50 Contact resistance < 0.3 mΩ Max. current 25 A Voltage 630 V Overvoltage category III Degree of pollution 3 Rated surge voltage 6 kV Ambient temperature (operation) -40 °C ... 105 °C Cable specifications Type of cable PSLC11Y-J Shielded yes Cable structure 4x 2.5 mm² Cable structure (AWG) 14 AWG/4c External cable diameter 10.6 mm Outer sheath, material TPU Material wire insulation TPM External sheath, color orange RAL 2003 Nominal voltage, cable 1000 V Test voltage 4 kV Rated current 26 A Smallest bending radius, movable installation 116 mm Ambient temperature for fixed installation -50 °C ... 80 °C Ambient temperature for flexible installation -20 °C ... 70 °C Connector specifications (second page) Type straight plastic-sheathed Housing material Zinc die-cast Thread type M17 Degree of protection IP67, when in locked state Number of positions 3+PE Direction of rotation Standard Type of contact Pin Insertion/withdrawal cycles 50 04/20/2021   Page 3 / 7 https://www.phoenixcontact.com/us/products/1619327 Connector in molded plastic on both sides - K-3E-M17 M9/5,0-B01/M17 F8 - 1619327 Technical data Connector specifications (second page) Contact resistance < 0.3 mΩ Max. current 25 A Voltage 630 V Overvoltage category III Degree of pollution 3 Rated surge voltage 6 kV Ambient temperature (operation) -40 °C ... 105 °C Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram 1 PE Schematic diagram PE 3 3 2 2 Socket pin assignment Pin assignment of pin Diagram Dimensional drawing 25 20 1 15 !76 5 0 1 0 M17x1 10 2 = 4x2,5 mm 10 20 30 40 50 60 70 80 Ø21,2 I [A] 1 90  [°C] I = current strength, T = ambient temperature On the female side 04/20/2021   Page 4 / 7 https://www.phoenixcontact.com/us/products/1619327 Connector in molded plastic on both sides - K-3E-M17 M9/5,0-B01/M17 F8 - 1619327 Dimensional drawing Circuit diagram Ø21,3 M17x1 !74,2 Pin side 2 1 2,5mm 2 2,5mm 2 2 3 2,5mm PE 2,5mm 2 BKU 1 BKV 2 BKW 3 GN/YE PE Contact assignment of M17 plugs/sockets Classifications eCl@ss eCl@ss 10.0.1 27060106 eCl@ss 11.0 27060106 eCl@ss 4.0 27060300 eCl@ss 4.1 27060300 eCl@ss 5.0 27061800 eCl@ss 5.1 27061800 eCl@ss 6.0 27062000 eCl@ss 7.0 27062011 eCl@ss 9.0 27062011 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC001855 ETIM 6.0 EC001578 ETIM 7.0 EC003250 UNSPSC UNSPSC 6.01 26121604 UNSPSC 7.0901 26121604 UNSPSC 11 26121604 UNSPSC 12.01 26121604 UNSPSC 13.2 26121604 UNSPSC 18.0 39121465 UNSPSC 19.0 39121465 UNSPSC 20.0 39121465 UNSPSC 21.0 39121465 04/20/2021   Page 5 / 7 https://www.phoenixcontact.com/us/products/1619327 Connector in molded plastic on both sides - K-3E-M17 M9/5,0-B01/M17 F8 - 1619327 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC      B.00286/19 Accessories Accessories Conductor marking Insert label - PABA WH/15 - 1013151 Insert label, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: thread on, cable diameter range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20     Insert label - PABA YE/15 - 1013698 Insert label, Strip, yellow, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: thread on, cable diameter range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20     04/20/2021   Page 6 / 7 https://www.phoenixcontact.com/us/products/1619327 Connector in molded plastic on both sides - K-3E-M17 M9/5,0-B01/M17 F8 - 1619327 Accessories Insert label - PABA RD/15 - 1013944 Insert label, Strip, red, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: thread on, cable diameter range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20     Cutting tools Diagonal cutter - CUTFOX-S VDE - 1212207 Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested     Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 04/20/2021   Page 7 / 7