1621544

https://www.phoenixcontact.com/us/products/1621544 Coupler connector - SH-8ESS48A9LDLS - 1621544 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Coupling connector, straight long, shielded: yes, Screw locking, M23, Number of positions: 8+4+PE, Type of contact: Socket, Crimp connection, Cable diameter: 7.5 mm ... 18 mm The figure shows the product version with CAT5 interface Product Features ■ ■ ■ All housing can be fitted with pin or socket contacts A total of eight contacts are available for signal transmission Reduced connection time with optional SPEEDCON fast locking system Key Commercial Data Packing unit 1 pc Custom tariff number 85366990 Country of origin Germany Technical data Temperature range Ambient temperature (operation) -40 °C ... 130 °C Data of the insulating body Note Order information Crimp contacts, 8 x Ø 1 mm, 5 x Ø 2 mm, order separately Coding N Insulator material Polyamide (PA 6.6) Insertion/withdrawal cycles mechanical 100 Contact connection method Crimp connection Type of contacts Socket Number of positions 13 Contact diameter of power contacts 2 mm 04/07/2016   Page 1 / 3 https://www.phoenixcontact.com/us/products/1621544 Coupler connector - SH-8ESS48A9LDLS - 1621544 Technical data Data of the insulating body Litz wire cross section of power contacts min. 0.25 mm² Litz wire cross section of power contacts max. 4 mm² Nominal current per power contact at 25°C 30 A Nominal voltage, power contact 630 V AC Contact diameter of signal contacts 1 mm Litz wire cross section of signal contacts min. 0.06 mm² Litz wire cross section of signal contacts max. 1 mm² Nominal current per signal contact at 25°C 8A Nominal voltage, signal contact 50 V Overvoltage category III Degree of pollution 3 Housing data Housing material Turned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD-Zn) Type of locking Screw locking Degree of protection (when plugged in) IP67 IP68 Thread type M23 Cable seal data Min. cable diameter 7.5 mm Max. cable diameter 18 mm Classifications eCl@ss eCl@ss 5.1 27260701 eCl@ss 6.0 27260702 eCl@ss 8.0 27440102 ETIM ETIM 4.0 EC002635 ETIM 5.0 EC002635 Approvals Approvals 04/07/2016   Page 2 / 3 https://www.phoenixcontact.com/us/products/1621544 Coupler connector - SH-8ESS48A9LDLS - 1621544 Approvals Approvals EAC Ex Approvals Approvals submitted Approval details EAC  Drawings Schematic diagram 6 5 8 2 4 1 A D B M23x1 3 71,2 A Ø28 7 Dimensional drawing C Socket pin assignment, signal Pin version: dimension A = 4.7 mm, socket version: dimension A = 0 mm Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/07/2016   Page 3 / 3