1622459

https://www.phoenixcontact.com/us/products/1622459 AC charging controller - EV-CC-AC1-M3-CC-SER-HS - 1622459 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) The EV-CC-AC1-M3-CBC-SER-HS charging controller with housing for DIN rail mounting is used for charging electric vehicles at 3-phase AC networks according to IEC 61851-1, Mode 3. Optimized for charging stations with permanently mounted Vehicle Connector. All charging functions and comprehensive configuration settings are already integrated. Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626040615 Weight per Piece (excluding packing) 360.000 g Custom tariff number 85371098 Country of origin Germany Technical data Product definition Product type AC charging controller for private and commercial applications (EU/CN) Type in housing Standards/regulations IEC 61851-1 GB/T 18487.1-2015 SAE J1772 Charging mode Mode 3, Case C Conformance CE-compliant Dimensions Height 128 mm Width 124 mm Depth 64.00 mm 07/30/2017   Page 1 / 5 https://www.phoenixcontact.com/us/products/1622459 AC charging controller - EV-CC-AC1-M3-CC-SER-HS - 1622459 Technical data Ambient conditions Ambient temperature (operation) -35 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 30 % ... 95 % Degree of protection IP20 Inputs Number of digital inputs 5 Frequency range 50 Hz ... 60 Hz Nominal power consumption < 0.5 W (No-load) Nominal current IN ≤ 1 mA Nominal input voltage UN 12 V Input voltage range U1 0 V ... 3 V (Off) Input voltage range U2 9 V ... 15 V (On) Switching outputs Control of charging contactor Relay output C1.2 Minimum switching capacity 1500 VA Maximum switching voltage 250 V AC (External supply) Max. switching current 6A Digital outputs Control of additional functions 4 digital outputs Connection technology Screw connection Maximum output voltage 30 V Maximum output current 0.5 A (Total current for all outputs; internally supplied) 0.6 A (Per output; externally supplied) Data interfaces RS-485 interface RS-485 2-wire Bus system RS-485 Number of interfaces 1 Connection method Screw connection Transmission speed 9.6 kbps (Standard) Transmission speed range 9.6 kbps ... 19.2 kbps (adjustable) Data flow control/protocols Modbus/RTU (slave) Connection data Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section solid min. 0.2 mm² 07/30/2017   Page 2 / 5 https://www.phoenixcontact.com/us/products/1622459 AC charging controller - EV-CC-AC1-M3-CC-SER-HS - 1622459 Technical data Connection data Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Connection method Screw connection Device supply Supply voltage 230 V Supply voltage range 100 V AC ... 240 V AC (nominal voltage range) Max. current consumption 40 mA Nominal power consumption < 1 W (No-load) Frequency range 50 Hz ... 60 Hz Classifications eCl@ss eCl@ss 4.0 27210902 eCl@ss 4.1 27371105 eCl@ss 5.0 27371801 eCl@ss 5.1 27371810 eCl@ss 6.0 27371810 eCl@ss 7.0 27371810 eCl@ss 8.0 27242207 eCl@ss 9.0 27144703 ETIM ETIM 3.0 EC001505 ETIM 4.0 EC001599 ETIM 5.0 EC001413 ETIM 6.0 EC002889 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121535 UNSPSC 11 39121535 UNSPSC 12.01 39121535 UNSPSC 13.2 39121801 07/30/2017   Page 3 / 5 https://www.phoenixcontact.com/us/products/1622459 AC charging controller - EV-CC-AC1-M3-CC-SER-HS - 1622459 Accessories Accessories AC charging cable AC charging cable - EV-T2G3C-3AC32A-5,0M6,0ESBK01 - 1627355 AC charging cable with Vehicle Connector, open cable end, with protective cap, Type 2, IEC 62196-2, 32 A / 480 V (AC), Design line C-Line, Cable: 5 m, black, straight, Mating face: black, Handle area: gray     License Software dongle - USB-DONGLE-EV-EMOB - 1627632 USB dongle with license for PCs for controlling the AC charging current in charging stations for E-Mobility (EVSE)     Parameterization memory Program / configuration memory - SD-FLASH-2GB-EV-EMOB - 1624092 Program and configuration memory for storing the application program and other files in the file system of the PLC, plugin, 2 GB with license key for the function block libraries for E-Mobility     Residual current monitoring module Differential current monitoring - EV-RCM-C1-AC30-DC6 - 1622450 The residual current module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current circuit breaker) is protected against potential DC residual currents. A 1 or 2channel product version is available.     07/30/2017   Page 4 / 5 https://www.phoenixcontact.com/us/products/1622459 AC charging controller - EV-CC-AC1-M3-CC-SER-HS - 1622459 Accessories Differential current monitoring - EV-RCM-C2-AC30-DC6 - 1622451 The residual current module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current circuit breaker) is protected against potential DC residual currents. A 1 or 2channel product version is available.     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 07/30/2017   Page 5 / 5