1623389

https://www.phoenixcontact.com/us/products/1623389 AC charging cable - EV-T1M3C-1AC32A-5,0M6,0ESBK00 - 1623389 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) AC charging cable with Vehicle Connector, open cable end, with protective cap, Type 1, IEC 62196-2, SAE J1772, 32 A / 250 V (AC), Design line Standard, Cable: 5 m, black, straight, Mating face: gray, Griffbereich: gray Product Description AC charging cable with Vehicle Connector and open cable end for charging electric vehicles (EV) with alternating current (AC) via type 1 Vehicle Inlets, for installation at charging stations for E-Mobility (EVSE) Key Commercial Data Packing unit 1 STK Custom tariff number 85444290 Country of origin Germany Technical data Product definition Product type AC charging cable with Vehicle Connector, open cable end, with protective cap Type Design line 1 Standards/regulations IEC 62196-2 SAE J1772 Charging standard Type 1 Charging mode Mode 3 Type of charging current AC single-phase Dimensions Height 72.6 mm Width 55.2 mm Depth 235.9 mm 08/24/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/1623389 AC charging cable - EV-T1M3C-1AC32A-5,0M6,0ESBK00 - 1623389 Technical data Dimensions Conductor length 5m Stripping length 45 mm ±10 mm Ambient conditions Ambient temperature (operation) -30 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Max. altitude 5000 m (above sea level) Degree of protection IP44 (plugged in) IP54 (Protective cap) Electrical properties Maximum charging power 8 kW Number of phases 1 Number of power contacts 3 (L1, N, PE) Rated current of power contacts 32 A Rated voltage for power contacts 250 V AC Number of signal contacts 2 (CP, CS) Rated current for signal contacts 2A Rated voltage for signal contacts 30 V AC Type of signal transmission Pulse width modulation Resistor coding 480 Ω (Lever actuated) 150 Ω (Lever not actuated) Mechanical properties Insertion/withdrawal cycles > 10000 Insertion force < 75 N Withdrawal force < 75 N Design Design line Standard Housing color black Pin connector pattern color gray Color handle area gray Actuating element color gray Color protective cap black Label 14.1 mm x 44.8 mm (customer logo on request) Material Housing material Plastic Material connection profile Plastic 08/24/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/1623389 AC charging cable - EV-T1M3C-1AC32A-5,0M6,0ESBK00 - 1623389 Technical data Material Material handle area Soft plastic Actuating lever material Metal Material protective cap Soft plastic Material surface of contacts Ag Cable Cable structure 3 x 6.0 mm² + 1 x 0.5 mm² (prEN 50620, VDE Reg. 8789 class 5) External cable diameter 12.8 mm ±0.4 mm Type of conductor straight Outer sheath, material TPE-U External sheath, color black Minimum bending radius 192 mm (15 x diameter) Drawings Connection diagram L2/N L1 CS CP PE Pin assignment of the Vehicle Connector 08/24/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/1623389 AC charging cable - EV-T1M3C-1AC32A-5,0M6,0ESBK00 - 1623389 Dimensional drawing 235,9 202,6 16,9 62,6 47,1 39,2 112,6 22,9 18,5 55,2 33,4 6,9 33,3 30 43,8 Dimensional drawing of Vehicle Connector 08/24/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/1623389 AC charging cable - EV-T1M3C-1AC32A-5,0M6,0ESBK00 - 1623389 Schematic diagram AC [I] AC [II] AC [III] AC [IV] AC [V] 08/24/2016   Page 5 / 6 Operating instructions https://www.phoenixcontact.com/us/products/1623389 AC charging cable - EV-T1M3C-1AC32A-5,0M6,0ESBK00 - 1623389 Classifications eCl@ss eCl@ss 8.0 27059290 eCl@ss 9.0 27144705 ETIM ETIM 5.0 EC002839 Accessories Accessories Mounting material Holder - EV-T1AC-PARK - 1624139     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/24/2016   Page 6 / 6