https://www.phoenixcontact.com/us/products/1624785
Cable plug in molded plastic - K-7E - OE/2,0-D00/M17 F8 - 1624785
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Cable plug in molded plastic, length: 2 m, color of outer sheath: orange RAL 2003
Your advantages
Our standard: robust halogen-free PUR cable
Simple and safe: 100% electrically tested and assembled ready for use
Designs with pre-assembled cables on one or both sides
High flexibility: customer-specific assemblies and cable lengths can be supplied
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
2 pc
GTIN
GTIN
4046356637244
Weight per Piece (excluding packing)
400.000 g
Custom tariff number
85444290
Country of origin
Germany
Technical data
Conductor length
2m
Standards and Regulations
Safety note
WARNING: The connectors may not be plugged in or disconnected under
load. Ignoring the warning or improper use may damage persons and/or
property.
04/14/2021 Page 1 / 7
https://www.phoenixcontact.com/us/products/1624785
Cable plug in molded plastic - K-7E - OE/2,0-D00/M17 F8 - 1624785
Technical data
Standards and Regulations
• WARNING: Commission properly functioning products only. The products
must be regularly inspected for damage. Decommission defective products
immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate
the product. They must observe the following safety notes. The qualified
personnel must be familiar with the basics of electrical engineering. They
must be able to recognize and prevent danger. The relevant symbol on the
packaging indicates that only personnel familiar with electrical engineering
are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and
electrical device engineering.
• When operating the connectors in outdoor applications, they must be
separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the
standards listed (e.g. the ones listed in the product accessories online at
phoenixcontact.com/products).
• When using the product in direct connection with third-party
manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must
be grounded
• Ensure that the protective or functional ground has been properly
connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are
applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page
at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors
does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without
twisting it.
• The connector warms up in normal operation. Depending on the ambient
conditions, the surface of the connector can continue to warm up. In
this case, the user is responsible for posting warnings (e.g. DIN EN ISO
13732-1:2008-12).
Connector specifications
Type
straight plastic-sheathed
Housing material
Zinc die-cast
Thread type
M17
Locking type
Screw locking
Degree of protection
IP67, when in locked state
Number of positions
7+PE
04/14/2021 Page 2 / 7
https://www.phoenixcontact.com/us/products/1624785
Cable plug in molded plastic - K-7E - OE/2,0-D00/M17 F8 - 1624785
Technical data
Connector specifications
Direction of rotation
Standard
Type of contact
Socket
Insertion/withdrawal cycles
50
Contact resistance
< 0.3 mΩ
Max. current
14 A
Voltage
630 V
Overvoltage category
III
Degree of pollution
3
Rated surge voltage
6 kV
Ambient temperature (operation)
-40 °C ... 105 °C
Cable specifications
Type of cable
9YSLC11Y-JZ
Shielded
yes
Cable structure
4 x 0.75 mm² + 2 x 2 x 0.34 mm² StC
Cable structure (AWG)
19 AWG/4c + 22 AWG/1pr + 22 AWG/1pr
External cable diameter
10.7 mm
Outer sheath, material
PUR
Material wire insulation
TPM
External sheath, color
orange RAL 2003
Nominal voltage, cable
500 V
Test voltage
4 kV
Rated current
12 A
Smallest bending radius, fixed installation
54 mm
Smallest bending radius, movable installation
81 mm
Ambient temperature for fixed installation
-40 °C ... 90 °C
Ambient temperature for flexible installation
-30 °C ... 90 °C
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
04/14/2021 Page 3 / 7
https://www.phoenixcontact.com/us/products/1624785
Cable plug in molded plastic - K-7E - OE/2,0-D00/M17 F8 - 1624785
Diagram
I [A]
Schematic diagram
1
2
15
6
5
7
3
20
1
10
4
5
Connector pin assignment
0
1
0
2
= 4x0,75 mm + 2x2x0,34 mm
10
20
30
40
50
2
60
70
80
90
[°C]
I = current strength, T = ambient temperature
Dimensional drawing
Circuit diagram
Dimensional drawing
Ø21,2
M17x1
!76
2
1
0,75mm
2
0,75mm
3
0,75mm
PE
0,75mm
A
0,34mm
B
0,34mm
C
0,34mm
D
0,34mm
2
2
2
2
2
2
2
BK1
BK2
BK3
GN/YE
BK5
BK6
BK7
BK8
Contact assignment of M17 plugs/sockets, cable type D00
Classifications
eCl@ss
eCl@ss 10.0.1
27060106
eCl@ss 11.0
27060106
eCl@ss 4.0
27260700
eCl@ss 4.1
27260700
eCl@ss 5.0
27260700
eCl@ss 5.1
27260700
eCl@ss 6.0
27062000
eCl@ss 7.0
27062011
eCl@ss 9.0
27062011
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC001121
ETIM 6.0
EC001578
ETIM 7.0
EC003250
04/14/2021 Page 4 / 7
https://www.phoenixcontact.com/us/products/1624785
Cable plug in molded plastic - K-7E - OE/2,0-D00/M17 F8 - 1624785
Classifications
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 11
43172015
UNSPSC 12.01
43201404
UNSPSC 13.2
43201404
UNSPSC 18.0
39121465
UNSPSC 19.0
39121465
UNSPSC 20.0
39121465
UNSPSC 21.0
39121465
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approval details
EAC
B.00286/19
Accessories
Accessories
Conductor marking
Insert label - PABA WH/15 - 1013151
Insert label, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: thread on, cable diameter
range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20
04/14/2021 Page 5 / 7
https://www.phoenixcontact.com/us/products/1624785
Cable plug in molded plastic - K-7E - OE/2,0-D00/M17 F8 - 1624785
Accessories
Insert label - PABA YE/15 - 1013698
Insert label, Strip, yellow, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: thread on, cable diameter
range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20
Insert label - PABA RD/15 - 1013944
Insert label, Strip, red, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: thread on, cable diameter
range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20
Cutting tools
Diagonal cutter - CUTFOX-S VDE - 1212207
Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested
Marker carrier cable
Conductor marker carrier - PATG 5/23 - 0808024
Conductor marker carrier, transparent, unlabeled, mounting type: slide-on, cable diameter range: 10 ... 14 mm, lettering
field size: 23 x 4 mm
Marker pen
04/14/2021 Page 6 / 7
https://www.phoenixcontact.com/us/products/1624785
Cable plug in molded plastic - K-7E - OE/2,0-D00/M17 F8 - 1624785
Accessories
Marker pen - B-STIFT - 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Stripping tool
Stripping tool - WIREFOX 10 - 1212150
Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting
capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com
04/14/2021 Page 7 / 7
