M23-17P1N8A8004 - Cable connector
1629201
https://www.phoenixcontact.com/us/products/1629201
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
M23, Cable connector, series: M23 PRO, straight, shielded: yes, Screw locking mechanism, No. of pos.: 17, Direction of rotation:
Standard, contact connection type: Pin, Crimp connection, cable diameter range: 9 mm ... 15 mm, coding: N, Item is lead-free in
accordance with RoHS II without Exemption 6c (Pb 50 V AC, conductive connector
housings must be grounded
• Ensure that the protective or functional ground has been
properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3
are applicable when combining several circuits in a cable and/or
connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the
download page at phoenixcontact.com/products must be
observed for this product.
• Operate the connector only when it is fully plugged in and
interlocked.
• Ensure that when laying the cable, the tensile load on the
connectors does not exceed the upper limit specified in the
standards.
• Observe the minimum bending radius of the cable. Lay the
cable without twisting it.
• The connector warms up in normal operation. Depending on the
ambient conditions, the surface of the connector can continue to
warm up. In this case, the user is responsible for posting
Jan 8, 2024, 10:09 AM
Page 2 (14)
M23-17P1N8A8004 - Cable connector
1629201
https://www.phoenixcontact.com/us/products/1629201
warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product properties
Product type
Circular connector (cable-side)
Connector
Insulating body
Note
Order information: Order crimp contacts Ø 1 mm separately
Coding
N
Insulation body material
PA 6.6
Insertion/withdrawal cycles
100
Connection method
Crimp connection
Contact switching type
Pin
Application
Signal
Number of positions
17
Direction of rotation
Standard
Connection profile
17
Contact diameter Signal
contacts
1 mm
Litz wire cross-section Signal
contacts min.
0.08 mm²
Litz wire cross-section Signal
contacts max.
1 mm²
Nominal current per signal contact
8A
Note
for max. connection cross section
Rated voltage Signal contact
125 V
Rated surge voltage
2 kV
Overvoltage category
III
Degree of pollution
3
Installation height
2000 m
Housing
Housing material
GD-Zn
Type of locking
Screw locking mechanism
Pg screw connection
none
Degree of protection (plugged in)
IP66 / IP68 (2m / 24h) / IP69K
Thread type
M23
Seal
External cable diameter
9 mm ... 15 mm
Seal material
FKM
Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)
-40 °C ... 105 °C (see to derating)
Permanent temperature
125 °C (DIN EN 60512-9-2 / 1000 h)
Jan 8, 2024, 10:09 AM
Page 3 (14)
M23-17P1N8A8004 - Cable connector
1629201
https://www.phoenixcontact.com/us/products/1629201
Drawings
I [A]
Diagram
10
5
= 17x0,75mm2
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130
[°C]
I = current strength, ϑ = ambient temperature, 17x 6 A
Jan 8, 2024, 10:09 AM
Page 4 (14)
M23-17P1N8A8004 - Cable connector
1629201
https://www.phoenixcontact.com/us/products/1629201
Schematic diagram
N
11
12
1
2
10 16
13
3
9
15 17 14
4
8
7
5
6
Connector pin assignment
Jan 8, 2024, 10:09 AM
Page 5 (14)
M23-17P1N8A8004 - Cable connector
1629201
https://www.phoenixcontact.com/us/products/1629201
Dimensional drawing
Ø27,4
Ø27,4
58,1
Technical drawings can be found under Downloads
Jan 8, 2024, 10:09 AM
Page 6 (14)
M23-17P1N8A8004 - Cable connector
1629201
https://www.phoenixcontact.com/us/products/1629201
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1629201
cUL Recognized
Approval ID: E335019-20141210
Nominal voltage UN
Nominal current IN
Cross section AWG
Cross section mm2
150 V
3.5 A
- 20
-
Nominal voltage UN
Nominal current IN
Cross section AWG
Cross section mm2
150 V
4.5 A
- 20
-
UL Recognized
Approval ID: E335019-20141210
cULus Recognized
Jan 8, 2024, 10:09 AM
Page 7 (14)
M23-17P1N8A8004 - Cable connector
1629201
https://www.phoenixcontact.com/us/products/1629201
Classifications
ECLASS
ECLASS-11.0
27440102
ECLASS-12.0
27440116
ECLASS-13.0
27440116
ETIM
ETIM 9.0
EC002635
UNSPSC
UNSPSC 21.0
39121400
Jan 8, 2024, 10:09 AM
Page 8 (14)
M23-17P1N8A8004 - Cable connector
1629201
https://www.phoenixcontact.com/us/products/1629201
Environmental product compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Jan 8, 2024, 10:09 AM
Page 9 (14)
M23-17P1N8A8004 - Cable connector
1629201
https://www.phoenixcontact.com/us/products/1629201
Accessories
SF-Z0028 - Torque screwdriver
1607456
https://www.phoenixcontact.com/us/products/1607456
Torque screwdriver, series: RC
SF-Z0027 - Hook wrench
1607455
https://www.phoenixcontact.com/us/products/1607455
Hook wrench, series: RC
RF-Z0007 - Special wrench
1614347
https://www.phoenixcontact.com/us/products/1614347
Special wrench, series: RF
Jan 8, 2024, 10:09 AM
Page 10 (14)
M23-17P1N8A8004 - Cable connector
1629201
https://www.phoenixcontact.com/us/products/1629201
UNIFOX-RT M23 17 - Contact removal tool
1253082
https://www.phoenixcontact.com/us/products/1253082
Removal tool for the M23 PRO series
17-position signal contact carrier
RC-11P2000 - Crimp contact
1596770
https://www.phoenixcontact.com/us/products/1596770
Crimp contact, Pin, turned, Single
contact, contact diameter: 1 mm,
crimp range: 0.08 mm2 ... 0.22 mm2,
Alternative product in accordance with
RoHS II without Exemption 6c (Pb