1636392

https://www.phoenixcontact.com/us/products/1636392 Contact insert - HC-K 6/ 6 ESTS - 1636392 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON pin insert, K6/6 series, for 6 power and 6 control contacts and PE, axial screw connection (power contacts)/screw connection (control contacts) Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc GTIN GTIN 4046356180313 Weight per Piece (excluding packing) 280.000 g Custom tariff number 85366990 Country of origin Germany Technical data General Note For HEAVYCON ADVANCE and HEAVYCON housing of type B24, with third-party logo Connectors may be operated only when there is no load/voltage. Connection method Axial screw connection (power contacts) Screw connection (control contacts) Tightening torque 6 Nm (Power contacts for 16 mm²) 7 Nm (Power contacts for 25 mm²) 0.8 Nm (control contacts) 8 Nm (Power contacts for 35 mm²) Torque 0.8 Nm ... 1.2 Nm (PE connection) 07/04/2020   Page 1 / 7 https://www.phoenixcontact.com/us/products/1636392 Contact insert - HC-K 6/ 6 ESTS - 1636392 Technical data General 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) Degree of pollution 3 Overvoltage category III Number of positions 6+6+PE No. of power contacts 6 No. of control contacts 6 Insertion/withdrawal cycles ≥ 500 Size B24 B48 Contact numbering 1-6 Conductor cross section 16 mm² ... 35 mm² (power contacts) 0.2 mm² ... 2.5 mm² (control contacts) Connection cross section AWG 5 ... 2 (power contacts) 24 ... 13 (control contacts) Stripping length of the individual wire 13 mm ±1 mm (Power) 7.5 mm (Signal) Wire diameter including insulation 11.4 mm (max., power contacts) Assembly instructions To ensure correct use, installation in housing with IP54 protection or better is required Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C Material data Contact material Cu alloy Material of contact surface, power contact Ag Material of contact surface, control contact Ag Contact carrier material PC Electrical characteristics Rated voltage (III/3) 690 V (power contacts) 400 V (control contacts) Rated surge voltage 8 kV (power contacts) 6 kV (control contacts) Rated current 100 A (power contacts) 16 A (control contacts) Standards and Regulations Connection in acc. with standard CSA 07/04/2020   Page 2 / 7 https://www.phoenixcontact.com/us/products/1636392 Contact insert - HC-K 6/ 6 ESTS - 1636392 Technical data Standards and Regulations Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Diagram Derating diagram 07/04/2020   Page 3 / 7 https://www.phoenixcontact.com/us/products/1636392 Contact insert - HC-K 6/ 6 ESTS - 1636392 Dimensional drawing Mounting cutout when used without housing Schematic diagram Axial connection Classifications eCl@ss eCl@ss 10.0.1 27440205 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27261200 eCl@ss 6.0 27261200 07/04/2020   Page 4 / 7 https://www.phoenixcontact.com/us/products/1636392 Contact insert - HC-K 6/ 6 ESTS - 1636392 Classifications eCl@ss eCl@ss 7.0 27440205 eCl@ss 8.0 27440205 eCl@ss 9.0 27440205 ETIM ETIM 2.0 EC000438 ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 ETIM 6.0 EC000438 ETIM 7.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 UNSPSC 18.0 39121522 UNSPSC 19.0 39121522 UNSPSC 20.0 39121522 UNSPSC 21.0 39121522 Approvals Approvals Approvals EAC / UL Recognized Ex Approvals Approval details EAC      RU CDE.BL08.B.00511 07/04/2020   Page 5 / 7 https://www.phoenixcontact.com/us/products/1636392 Contact insert - HC-K 6/ 6 ESTS - 1636392 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 600 V Nominal current IN 16 A mm²/AWG/kcmil 14  E118976 Accessories Accessories Screwdriver tools Screwdriver - SF-SL 0,6X3,5-100 S-VDE - 1212587 Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Socket spanner Screwdriver - SF-THEX 2-100 - 1212637 T-handle screwdriver, for Allen screws, hexagonal (with chamfer), size: hex 2 x 100 mm, ergonomically shaped handle, matt chrome-plated     Additional products Contact insert - HC-K 6/ 6 EBUS - 1636402 HEAVYCON socket insert, K6/6 series, for 6 power and 6 control contacts and PE, axial screw connection (power contacts)/screw connection (control contacts)     07/04/2020   Page 6 / 7 https://www.phoenixcontact.com/us/products/1636392 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 07/04/2020   Page 7 / 7