1636884

Extract from the online catalog     HC-M-HS 200/70-MOD-ST Order No.: 1636884 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1636884   HEAVYCON contact insert module, connector, 1-pos., for axial screw connection, 200 A, 40-70 mm²   Product notes WEEE/RoHS-compliant since: 10/31/2006 Commercial data GTIN (EAN) 4 046356 095259 sales group D042 Pack 1 pcs. Customs tariff 85366990 Catalog page information Page 451 (PC-2009) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data Electrical characteristics Note Required for housing HC-B6 to B48, (housing height min. 72 mm), housing HC-ADVANCE-B6 to B24, hinged retaining frame HC-M-MHR..., axial connection for 5 mm Allen wrench Rated voltage (III/3) 1000 V Rated current 200 A PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 5 Jan 27, 2011 HC-M-HS 200/70-MOD-ST Order No.: 1636884 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1636884 Rated surge voltage 8 kV Ambient temperature (operation) -40 °C ... 125 °C Number of positions 1 Mechanical characteristics Conductor cross-section 40 mm² ... 70 mm² Connection cross-section AWG 1 ... 2/00 Stripping length of the individual wire 16 mm Tightening torque 9 Nm (40 - 50 mm ) 2 2 10 Nm (70 mm ) Wire diameter including insulation 16 mm Hexagonal socket WAF 5 Insertion/withdrawal cycles ≥ 500 General characteristics Number of module slots 2 Connection method Axial screw connection Inflammability class acc. to UL 94 V0 Pollution degree 3 Surge voltage category III Assembly instructions - Use only flexible conductors,- Connection of wires with 5 mm an Allen wrench,- Housing height h ≥ 72 mm,- Connectors may only be operated without load/voltage. Connection Note regarding axial connection technology: Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) should be checked before use.Connection Before starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The wires should be inserted as far as they will go in the contact chamber (until the insulation touches the contact). Hold wires in position and use socket wrench to tighten. The used wire end should be cut off before connecting again. The connection screw may only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable should be mechanically intercepted at an appropriate distance from the connection point (e.g., by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. The module cannot be used simultaneously with the HC-B..-TMB-SD-IP65 and HC-B..-TMS-SD-IP65 protective covers. PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 2 / 5 Jan 27, 2011 HC-M-HS 200/70-MOD-ST Order No.: 1636884 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1636884 Material data Contact material Copper alloy Contact surface material Ag Contact carrier material PC Certificates / Approvals Certification UL Diagrams/Drawings Diagram Derating diagram (3 modules in HC-B 24 housing) Dimensioned drawing Male insert PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 3 / 5 Jan 27, 2011 HC-M-HS 200/70-MOD-ST Order No.: 1636884 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1636884 Schematic diagram Axial screw connection PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 5 Jan 27, 2011 HC-M-HS 200/70-MOD-ST Order No.: 1636884 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1636884 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de © 2010 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 5 / 5 Jan 27, 2011