1640663

https://www.phoenixcontact.com/us/products/1640663 Panel feed-through - Q 1,5/3FL/13-M20KU-ESA - 1640663 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) QUICKON panel feed-through, for external wall mounting with manual solder/slip-on connection, 4.8 x 0.8 mm, 3pos. Key commercial data Packing unit 1 pc Minimum order quantity 10 pc Weight per Piece (excluding packing) 22.57 GRM Custom tariff number 85366990 Country of origin Poland Technical data General Connection If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. Connection method QUICKON connection Manual solder/slip on connection Number of positions 3 Wrench size, union nut 24 mm Tightening torque, union nut 2.5 Nm Wrench size, contact carrier 24 mm Tightening torque contact carrier 3.75 Nm Tightening torque, counter nut 3.75 Nm Number of connections 3 Conductor cross section stranded min. 0.75 mm² Conductor cross section stranded max. 1.5 mm² Conductor cross section AWG/kcmil min. 18 Conductor cross section AWG/kcmil max 16 1/7/14   Page 1 / 6 https://www.phoenixcontact.com/us/products/1640663 Panel feed-through - Q 1,5/3FL/13-M20KU-ESA - 1640663 Technical data Conductor Structure of individual litz in acc. with VDE 0295 / smallest wire diameter VDE 0295 Cl.2-5, min. wire diameter 0.2 mm Wire insulation material PVC/PE Wire diameter including insulation >= 3 mm Ambient conditions Degree of protection IP65 IP67 Ambient temperature (operation) -25 °C ... 80 °C (Specifications of the cable manufacturer must be observed.) -25 °C ... 50 °C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.) Electrical characteristics Nominal current IN 17.5 A (15 A with slip-on sleeve 2.5 mm²; 12 A with slip-on sleeve 1.5 mm².) Rated voltage (III/3) 250 V Note on the rated voltage (III/3) with insulating sleeve Rated voltage (III/2) 320 V Note on the rated voltage (III/2) with insulating sleeve Rated voltage (II/2) 630 V Note on the rated voltage (II/2) with insulating sleeve Mechanical characteristics QUICKON connectability 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) PC QUICKON thread type M20 x 1,5 Impact category 4 Material data Contact material Copper alloy Contact surface material Pre-nickel plated and tin-plated Contact carrier material PA 66 Inflammability class according to UL 94 V0 Surge voltage category III Pollution degree 3 Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 1/7/14   Page 2 / 6 https://www.phoenixcontact.com/us/products/1640663 Panel feed-through - Q 1,5/3FL/13-M20KU-ESA - 1640663 Classifications eCl@ss eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC000516 ETIM 4.0 EC000516 ETIM 5.0 EC000516 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals UL Recognized / VDE Zeichengenehmigung / cUL Recognized / GOST / GOST / cULus Recognized Ex Approvals Approvals submitted Approval details 1/7/14   Page 3 / 6 https://www.phoenixcontact.com/us/products/1640663 Panel feed-through - Q 1,5/3FL/13-M20KU-ESA - 1640663 Approvals UL Recognized      Nominal current IN 15 A Nominal voltage UN 250 V VDE Zeichengenehmigung      mm²/AWG/kcmil 0.75-1.5 Nominal voltage UN 500 V cUL Recognized      Nominal current IN 11 A Nominal voltage UN 250 V GOST  GOST  cULus Recognized  Accessories Accessories Insulating sleeve 1/7/14   Page 4 / 6 https://www.phoenixcontact.com/us/products/1640663 Panel feed-through - Q 1,5/3FL/13-M20KU-ESA - 1640663 Accessories Insulating sleeve - PT/FS 4,8 - 1670497 Insulating sleeve, as touch protection, for 4.8 mm slip-on sleeves, slide onto the conductor before     Mounting material Nut - Q-MU M20 - 1640702 Nut (plastic) to lock the contact carrier from the inside of the device     Pressure nut Lock nut - Q-SMU PG13,5 SET COD2 - 1670963 Locking nut, can only be released with Allen wrench, coding 2     Protective cap Filler plugs - Q-PROT13/16 - 1670222 Closing caps, for Pg13/ Pg16, for closing unoccupied connections     Socket spanner 1/7/14   Page 5 / 6 https://www.phoenixcontact.com/us/products/1640663 Panel feed-through - Q 1,5/3FL/13-M20KU-ESA - 1640663 Accessories Socket wrench - QSS 24 - 1670219 Allen wrench, for loosening and fastening the QUICKON union nut, WAF 24 mm     Drawings Dimensioned drawing 6,8 9 3,9 M20 ca. 23 24 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 1/7/14   Page 6 / 6