1648319

https://www.phoenixcontact.com/us/products/1648319 Contact insert - HC-B 24-I-DT-M - 1648319 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) HEAVYCON male insert, B24 series, 24-pos., Push-in connection   Key commercial data Packing unit 11 Weight per Piece (excluding packing) 121.66 GRM Custom tariff number 85366990 Country of origin China Technical data General Note For HEAVYCON ADVANCE and HEAVYCON housing of B24 type. Coding using the CP-HC (1686478) coding profile. HC-B6.../ HC-B10... for two coding profiles. HC-B16.../ HC-B24... for 4 coding profiles. Connectors may be operated only when there is no load/voltage. Connection method Push-in connection Pollution degree 3 Surge voltage category III Constructional and testing regulations DIN EN 61984 DIN EN 60664 IEC 60352 Number of positions 24+PE Insertion/withdrawal cycles ≥ 500 Design B24 Conductor cross section 0.5 mm² ... 2.5 mm² Connection cross section AWG 20 ... 14 Stripping length of the individual wire 10 mm (13 mm if ferrules are used) 13.11.2013   Page 1 / 7 https://www.phoenixcontact.com/us/products/1648319 Contact insert - HC-B 24-I-DT-M - 1648319 Technical data General Assembly instructions 1) For single-stranded litz wires. For stranded wires use ferrules: 0.5 mm²... 2.5 mm² with / without insulating collar, length: 10 mm. 2) SZF0-0.4x2.5 screwdriver (similar to DIN 5264). Connection For housing type B24. Connectors may only be operated when there is no load/the power is switched off. Coding also using the CP-HC coding profile (1686478). HC-B6../HC-B10.. for 2 coding profiles. HC-B16../HCB24.. for 4 coding profiles. Mounting/removal of 0.5 - 0.75 mm² wires using a screwdriver. Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C (including heating up of contacts) Material data Inflammability class according to UL 94 V0 Contact material Copper alloy Contact surface material Ag Contact carrier material PA Electrical characteristics Rated voltage (III/3) 500 V Rated surge voltage 6 kV Rated current 16 A Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440209 ETIM ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC000438 UNSPSC UNSPSC 6.01 30211923 13.11.2013   Page 2 / 7 https://www.phoenixcontact.com/us/products/1648319 Contact insert - HC-B 24-I-DT-M - 1648319 Classifications UNSPSC UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 22-14 Nominal current IN 13 A Nominal voltage UN 600 V UL Recognized      mm²/AWG/kcmil 22-14 Nominal current IN 13 A Nominal voltage UN 600 V 13.11.2013   Page 3 / 7 https://www.phoenixcontact.com/us/products/1648319 Contact insert - HC-B 24-I-DT-M - 1648319 Approvals cUL Recognized      mm²/AWG/kcmil 22-14 Nominal current IN 13 A Nominal voltage UN 600 V cULus Recognized  Accessories Accessories Coding element Coding profile - CP-HC - 1686478 Encoding profile, 4 encoding profiles per strip, 40 strips per unit pack, for insertion in encoding grooves     Coding element - HC-CBU - 1676860 Coding socket for coding up to 16 connectors     Coding bolt - HC-CB - 1772722 Coding pin, prevents mismating of up to six connectors with an identical number of positions     13.11.2013   Page 4 / 7 https://www.phoenixcontact.com/us/products/1648319 Contact insert - HC-B 24-I-DT-M - 1648319 Accessories Coding element - HC-CST - 1676857 Coding peg for coding up to 16 connectors     Docking frame Docking frames - HC-B 24-ANDOCK - 1586141 Docking frame for racks, for contact inserts of B24 type, with four M5 flat headed screws, rack balance x/y axis +- 1.5 mm     Mounting material Mounting material - HC-B-PES - 1604997 PE screw, for contact inserts HC-B / HC-BB / HC-DD / HC-D40 / HC-D64     PE multiplier - HC-B-3PE - 1644326 PE multiplier, for three PE connections, for HC-B (besides HC-B..E..ZZ) / HC-BB / HC-DD / HC-D40 / HC-D64 contact inserts     Strain relief clamp - HC-B-ZG - 1685327 Strain relief clamps contact inserts of series: B-, BB-, D 40, D 64, DD and HV, straight cable exit     13.11.2013   Page 5 / 7 https://www.phoenixcontact.com/us/products/1648319 Contact insert - HC-B 24-I-DT-M - 1648319 Accessories Strain relief clamp - HC-B-ZS - 1685330 Strain relief clamps contact inserts of series: B-, BB-, D 40, D 64, DD and HV, lateral cable exit     Plug assembly frame Connector assembly frame - HC-SMR-B24 - 1687985 HEAVYCON connector assembly frame, for contact inserts of type B24     Plug mounting plate Connector assembly frame - HC-SMP 150-B24-AMQ - 1660944 HEAVYCON connector assembly frame with panel mounting base with double locking latch, for contact inserts of type B24, 150 mm long     Drawings 13 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 Diagram Operating current [A] Schematic diagram 32 28 24 B6 20 B10 16 12 B16 B24 8 2 4 0 2,5mm 0 20 40 60 80 100 120 Ambient temperature [°C] Connector pin assignment, connection side Derating diagram: HC-B...DT series 13.11.2013   Page 6 / 7 https://www.phoenixcontact.com/us/products/1648319 Contact insert - HC-B 24-I-DT-M - 1648319 Dimensioned drawing Dimensioned drawing 108 27 98 35,5 20 104 Ø3,4 35 34 27 111 104 HC-B 24-ESTZ male insert © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 13.11.2013   Page 7 / 7