1655331

https://www.phoenixcontact.com/us/products/1655331 D-SUB contact support - VS-15-ST-DSUB-3P-LH - 1655331 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) D-SUB contact carrier, shell size 2, accommodation for 3 combined contacts, type of contact pin, fixing with 4-40 UNC thread and solder pins, for panel mounting frame VS-15-... Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4046356029278 Weight per Piece (excluding packing) 10.990 g Custom tariff number 85366990 Country of origin Germany Technical data Mechanical characteristics Number of positions 3 Insertion/withdrawal cycles ≥ 500 Connection method Fitting to accept combined contact Type of contact Pin Mounting type Threads and solder pins Type D-SUB 15 Size of housing 2 Type of note Order information: Note The contacts must be ordered separately since they are not included in the scope of supply of the combi contact inserts. 12/14/2019   Page 1 / 7 https://www.phoenixcontact.com/us/products/1655331 D-SUB contact support - VS-15-ST-DSUB-3P-LH - 1655331 Technical data Ambient conditions Ambient temperature (operation) -55 °C ... 125 °C Material data Flammability rating according to UL 94 V0 Housing material Steel, yellow chromated Contact carrier material PBTP Contact surface material Gold over nickel Electrical characteristics Number of positions 3 Standards and Regulations Flammability rating according to UL 94 V0 Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. • The products are suitable for applications in plant, controller, and electrical device engineering. • When operating the connectors in outdoor applications, they must be separately protected against environmental influences. • Assembled products may not be manipulated or improperly opened. • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). • When using the product in direct connection with third-party manufacturers, the user is responsible. • For operating voltages > 50 V AC, conductive connector housings must be grounded • Only use tools recommended by Phoenix Contact • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products • Operate the connector only when it is fully plugged in and interlocked. • Operate the connector only when it is fully plugged in. 12/14/2019   Page 2 / 7 https://www.phoenixcontact.com/us/products/1655331 D-SUB contact support - VS-15-ST-DSUB-3P-LH - 1655331 Technical data Standards and Regulations • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. • Observe the minimum bending radius of the cable. Lay the cable without twisting it. • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 12/14/2019   Page 3 / 7 https://www.phoenixcontact.com/us/products/1655331 D-SUB contact support - VS-15-ST-DSUB-3P-LH - 1655331 Dimensional drawing D-SUB contact carrier 12/14/2019   Page 4 / 7 https://www.phoenixcontact.com/us/products/1655331 D-SUB contact support - VS-15-ST-DSUB-3P-LH - 1655331 Drilling diagram Drilling diagram Schematic diagram Classifications eCl@ss eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 eCl@ss 7.0 27440302 12/14/2019   Page 5 / 7 https://www.phoenixcontact.com/us/products/1655331 D-SUB contact support - VS-15-ST-DSUB-3P-LH - 1655331 Classifications eCl@ss eCl@ss 8.0 27440302 eCl@ss 9.0 27440205 ETIM ETIM 2.0 EC000438 ETIM 3.0 EC000438 ETIM 4.0 EC000438 ETIM 5.0 EC001132 ETIM 6.0 EC000438 ETIM 7.0 EC000438 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Approvals Approvals Approvals UL Recognized / EAC Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 118976 EAC      B.01742 12/14/2019   Page 6 / 7 https://www.phoenixcontact.com/us/products/1655331 D-SUB contact support - VS-15-ST-DSUB-3P-LH - 1655331 Accessories Accessories Solder contact D-SUB power contact - VS-ST-LH-3,6/18/3,8 - 1655467 POWER contact, for D-SUB combination inserts, for PCB assembly, pin, angled, rated current 40 A, gold-plated     D-SUB coaxial contact - VS-ST-KX-50-LP - 1655522 Coaxial contact, for D-SUB combination inserts, for PCB assembly, pin, angled, gold-plated     D-SUB coaxial contact - VS-ST-KX-75-LP - 1655645 Coaxial contact, for D-SUB combination inserts, for PCB assembly, pin, angled, gold-plated     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 12/14/2019   Page 7 / 7