1671124

https://www.phoenixcontact.com/gb/products/1671124 Flush-type connector - SACC-EC-M12MS-5CON-PG9/0,5 - 1671124 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/Actuator flush-type plug, 5-pos., M12, A-coded, front/screw mounting with Pg9 thread, can be positioned, with 0.5 m TPE litz wire, 5 x 0.34 mm² Why buy this product  Pre-assembled with litz wires for immediate use  Customer-specific assemblies and litz wire lengths available  Sealed on the litz wire side for optimum leak-tightness  For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 STK GTIN GTIN 4017918134976 Weight per Piece (excluding packing) 26.030 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. 12/22/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1671124 Flush-type connector - SACC-EC-M12MS-5CON-PG9/0,5 - 1671124 Technical data General Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 5 Insulation resistance > 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Front mounting Pg9 With locking nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA66 Material of grip body Nickel-plated brass Material, knurls Nickel-plated brass Sealing material NBR Cable Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm (Core insulation) Wire colors Black, brown,blue, white, gray Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 Ω/km Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) 12/22/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1671124 Flush-type connector - SACC-EC-M12MS-5CON-PG9/0,5 - 1671124 Technical data Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram ° Dimensional drawing 45 4 3 Ø16 PG9 5 1 Housing cutout for Pg9 fastening thread, mounting panel with thread Pin assignment M12 male connector, 5-pos., A-coded, male side Dimensional drawing 26 2 Circuit diagram 500 13 1 BN 2 WH 4 BK 3 BU 5 GY PG 9 M12x1 2 17 M12 flush-type plug, can be positioned min.2,5 Contact assignment of the M12 plug and the M12 socket Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 12/22/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1671124 Flush-type connector - SACC-EC-M12MS-5CON-PG9/0,5 - 1671124 Classifications ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals cULus Recognized / EAC Ex Approvals Approval details cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E221474-20140616     mm²/AWG/kcmil 22-20 Nominal current IN 4A Nominal voltage UN 60 V EAC      B.00767 Accessories Accessories Flat nut 12/22/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1671124 Flush-type connector - SACC-EC-M12MS-5CON-PG9/0,5 - 1671124 Accessories Flat nut - SACC-E-MU-PG9 - 1504084 Flat nut with Pg9 thread     Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Seal Flat gasket - SACC-PG9-SEAL CLM - 1556320 Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/22/2016   Page 5 / 5